drive

Here is a vid of my morning drive for Buckeye and the rest of you snowless guy http://m.youtube.com/watch?v=R5JWHl2tIPc#

Well was suitablly blown away today, there is a little place called Kragga Kamma game park about 5min for my house by car. Always thought it was a small place with one or two buck and swings for the kids. Damn this place is awesome, cost 10$ to get in, you drive in your own car - we took a...

5/8 8T 420 chain

What are peoples thoughts on belt drive centrifugal clutches do they work well do they slip if they get wet or muddy (not TAVS)

I'm going to be rebuilding a couple of Rupp Enduros over the winter, and thinking about re-powering them both with Predator engines. I want to keep the TAV type drive on them. Has anyone else done this conversion, and if so did you run into any problems doing it? Thanks.

A buddy is looking for a belt drive clutch. Should be for a 3/4 shaft.

Lookinng for the drive wheel and jackshaft brakeset up. o looking for complete or roller large frame ruttman or harrison wildcats. snow ski also.Willing ttade w/ with cash for the rite stuff.

Looking for the inner aluminum disc that go's against the engine. If there is a matching outer disc also available I would consider that too! Thanks!

i was just looking on cl and seen an awesome deal on a rupp in springfield mo, but it is a 4 hour 3.5 to 4 hour drive for me, which would kill my back. boy that would have been a great fathers day give to myself, hope someone on here picks it up.

I wanna get some more top end speed on my bug. Currently I have a 12 tooth drive sprocket. The engine is a 6.5 clone totally stock with no mod's. What would be your recommendation for the maximum amount of speed without to much loss of hill climbing power? I'm thinking 14 tooth. Thanks!

I wanna get some more top end speed on my bug. Currently I have a 12 tooth drive sprocket. The engine is a 6.5 clone totally stock with no mod's. What would be your recommendation for the maximum amount of speed without to much loss of hill climbing power? I'm thinking 14 tooth. Thanks!

I have a honda gx 160 they came off of a trash pump . it's a great engine fires right up nicely but the problem is that the drive shaft is slightly bigger than a 3 quarter inch clutch will take . it's almost like it's a millimeter bigger than 3 quarters of an inch. the clutch simply will not...

So I have this Herters sitting here. I wish I'd have been able to look it over better before buying it but am still WELL happy with it.. First drive problem is the outer rear tav sheeve. Theres a spot (melted?? :blink:) into it.. It looks like someone got it with a cutting torch or something...

Hello, I have been browsing this site for a bit and saw some pics of various "Front wheel drive" only mini bikes and scooters. I am interested in seeing more pics. I have gathered a few from the "Freak-Bikes, Homemades, Customs, Frankenbikes & Oddballs" thread ...

The drive belt on my TS290 is very loose. A couple inches of deflection. The belt IS worn but Im not sure if it is even the correct size. Does anyone have info on the belts use on this model? It has the CCW290 engine and I believe a salsbury 780 clutch. The current belt is 42.5" in circumference...

Well I have some used comet parts for sale. Comet 20 series driver missing the fixed side of the clutch. this one is for a 1 inch shaft. Price $20.00 Plus USPS shipping This one is also 20 series for a 3/4 shaft engine also missing the fixed side of the clutch Price $ 20.00...

Hi Guys, I have a 1970 Sears Roper 10" wheeled bike with a 6 hp Tecumseh engine I need a drive belt for. The way I got it it just had a V-belt on it and I'm not sure what sized belt it uses. It has a Comet clutch on it that appears to be the Symmetrical type. Does anyone have any info as to what...

I have a Tri-Sport with a Tecumseh engine and a variable belt drive. I believe this power unit is original to the machine. I don't know what model/HP the engine is, but if it matters, I can find out and post it. The center distance between the drive/driven pulleys is 6-1/2". Here are a few pics...

phot courtesy of Pomfish V-Plex unit (symetrical) and jackshaft.......Uses 21/32" (5/8) wide belt. .

Just swapped an OHV Intek for this 5HP flathead from SupaFly: Came off of a tiller, so the small auxiliary drive shaft was used for reverse. It also rotates opposite direction of the main shaft, and at a slower speed (just from eyeballing it, no idea what the ratio might be). Is there...