lower

I have a Predator 420cc that is the power plant for my mud motor. Basically I would like to build for more torque rather than high RPM's. More torque will allow me to spin a bigger prop, as well as get heavier loads moving easier. Top speed is not necessarily my goal, and reliability is a...

wanted Chrome Front Fork Lower for BC repo or orginal your help is greatly appreciated

Lower fork legs Pitted.What you see is what you get $15 + Shipping

I want to take the top fork yoke to the machine today to get the old handle bars cutoff. Are original ones available. I’m thinking that the lower tubes are what is left off the handle bars. Also, what kept the handle bars intact and prevent them from turning/spinning in the fork. Thanks Capnz

I am looking for a good set of cast aluminum lower front fork extensions for my Taco 22. Thanks!

mods so far: 90# main jet, gx140 tube, candy cane header stage 3, k&n dirt air filter w adapter, mods to do: remove governor internally, remove oil sensor internally, install 18lb valve springs, light porting of shortside radius, .016 copper cylinder head gasket, 14cc cylinder head ??? <---...

The legs are NOS but, but do have light rust and corossion. 50.00 shipped

Looking for a set of lower fork tubes for a 69 rupp roadster lower forks. One side will do. Sent mine to the machine shop and the kinked it. Grrr

Heres all you need to do this one. 2 5/16 5'' long bolts, 2 pieces of 3/8th pvc pipe, 2 washers, 2 nuts, and on 1 3/8 fauwset hole cover. Don't get me wrong, I like the welded fender to, but for 5 bucks...hey! When you put the fender on, put it on backwards, it looks better. Give me some...

I'm looking for feedback on the correct way to remove the spring from the fork lower tube on my Trail Horse. I didn't want to even attempt on my own for fear of screwing something up in the process. Here's a picture of what I'm talking about. Also, when I put it back together after it's...

Hey Guys, Anyone have an extra cast aluminum Taco 22 or Taco 44 fork lower? I need one of them. They look like the one in the attached photos. This one is off if my 68 Taco 44 that I am restoring. Thanks, HD

anyone have either/or the lower legs or springs for a trail horse front end? and a seat...

i did something different . on the lower frame tubes in front of the motor . i put a tapered peice of light gauge steel in between the tubes . it stops the crap from piling up on the front of the motor . works great .

Buy it now or it will disapear like the Terra Cat did... minibike fox

OK guys...here they are. The chrome plating is Nickel Chrome...not "show chrome". Plating process is the same, just no copper plating and buffing first. They aren't "perfect", but they are very nice. It's the same process that was used when the minibikes were built back in the day. If you...