manifold

Have an intake that mounts a clone carb to a clone motor . It's curved to move the carb to the side and rearward of the motor . It works great on my BC1300 . Price 40.00 shipped

Hello, I decided to remove the stock muffler and make/weld a straight pipe that fits inside the left rear shocks, stays clear of the tire and exits rear left under edge of the rear fender: I know the welds aren't pretty, using an Arc welder w/rods and also still learning. Tough time...

This wound up in a box of nos stuff I grabbed from a going out of business repair shop. Anyone know what kind of motor it goes to? Ive tried searching the numbers written on it.

I have a Rupp Mini Bike manifold and I can't find any information on it. The part number is 13566 but I can't find it in my parts book. Anybody know what it fits? Appreciate any help.

I called the parts store the dude said that's how it fits and on top of that the hardware they sent with it was mixed matched and used.. Carb to manifold

looking for a intake for a gx200 to a 28mm carb :thumbsup: please let me know if you have one you would like to part with thanks tim

Old one broke in shipping. Anybody got one? Shipping to 49331.

I bought a hs50 engine but I need a slanted intake for it to work on my minibike. I checked out black widow motor sports and they have them for $35 but I want to be absolutely sure its gonna fit this engine. Here are the numbers from the engine hs50-67197d ser 0227b . The intake on this engine...

I'm looking for a good pulsajet carb and tank. Gas. I have a nice 348 alcohol Tillotson and manifold set up to trade.

I have a 79cc Predator (this is going on a bicycle), and I want to use a 19mm mikuni carb. I have the carb and a manifold, but the manifold is too wide at the intake end (either end, actually but different bolt patterns on the carb end), to fit flush against the intake port due to the fact that...

I have a 5 hp briggs I got for cheap that came with a carb rusted shut. Tried to clean it but the acid made a hole in the carb sidecover. I made a intake manifold from a pitbike manifold and am ready for a new carb. I wanted to get a pz 22 clone carb or mikuni 22 but not the bigger one from nr...

I have a genuine (not Chinese faker) Walbro PZ22 carb and manifold for a Briggs 5HP flathead. Looking at $110 shipped. For the right money I may seperate

$160 shipped pm if interested

original exhaust manifold wanted .......

....and made it new again! I bought this Ruttman from a member that i don't see much anymore, Cap'n Knuckles. Awesome guy to deal with. The Ruttman was rough when I receive the pieces in the mail, but all the important parts were there. For a smaller bike, I wanted it to be bright, unlike...

$20 shipped

Slanted intake for Rupp bikes $65 shipped (obo)

Hello guys i got a tillotson Hl 357 carb, i have been looking for a manifold for it, and i came across the Arc one. That will fit a honda clone, i am just making sure this would be the right one to purchase here is the link. ARC Clone Intake Manifold for Tillotson HL Carb: Go Kart Parts: Racing...

1 H30 H35 Aluminum Flywheel, Great shape. Strong Magnets 1 H25 H30 H35 Throttle return spring 1 H35 Head. Bead Blasted, No Cracks. 2 NOS H35 Head Gaskets. 1 H30 H35 Intake Manifold. 2 NOS Intake/Exhaust Gaskets (note Breather gasket shown is for big block and not included) $40...

rims