small

Hard to find Tecumseh "Mini-Bike" specific throttle. These were reproduced by OldMiniBikes memeber Joe51 a couple years ago. This is the small block version which I believe fits all H25, H30, H35, HS40 and HS50 engines. The attention to detail on these is superb. These were manufactured exactly the...

I have a Power Dyne "RAIL" chopper bike and one of the guys here on the forum told me I need the small block HS series engine for my setup cause a lot of motors won't fit ? Or if anyone knows or has of another engine that would be period correct for my setup would be greatly...

Has anyone had any experience mixing an engine block and crankcase cover from different engines with any success? There seem to be many engine blocks such as HS50 and HSSK50 blocks for sale on ebay without the crankcase cover, but logic tells me that the crank bearings would be align bored...

Anyone ever see something along the lines of this anywhere??? It is from a bicycle gen set that is factory installed on my Micro-bike suitcase minibike. Trying to find something at least similar in style (small round and funky) for a Tecumseh generation lil indian I am building with...

This guy only wants $35/frame or $60 for the pair. FOUR WHEELER AND MINI BIKE FRAMES Call or text: 6015zero80457

I have a crank start blower housing for a small Briggs engine. Should fit 2.5-3.5hp. Cool teal blue color. I have one on my hot rod bike and love it. Great for a buildoff project. I tested it before removing. $25 plus shipping.

I was reading the Guardian today and found a reference to a mini series from the mid 80s on the BBC ( I remember watching this on TV Ontario public television around 1986 or 87 ). The hottest nurses on screen but the series is the real gem. Its a story of detective novel author and his...

i'm looking for small round gas tank width has to be less than 4" Thank you

A co worker pulled this from his father in laws barn compression is 125psi it's a two stroke about 27" from front tire to the rear tire set the coil air gap and fired right up so what is it? "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in...

49cc 66cc 80cc Engine Motorized Bicycle Fuel Gas Tank 5L with Petcock and Cap | eBay

Does anyone know of a good book on small engine repair? Im looking for a general book on rebuilding an engine, carbs, etc. I am trying to figure out how to hook up throttles from a snowblower motor to a mini bike, and other things. thanks for the help!

Small gas tank, 8" X 3", clean inside, no dings. Cap neck threads are mangled as shown in pic, but the cap will thread on. With brackets. 35. shipped FantomResto@hotmail.com 602 705-6557

Howdy hey again, Anyway, I've settled on using the 2.50hp engine I have (circa 1968) for a board-track racer inspired bike (to be run as a really fun moped!). That being said, I can't seem to find any real performance parts for either the 2.5's or 3.0hp powerplants. My goal is to not...

I was only craigslist a few week ago ( NO, im not on there all the time :out: ) And I came across a set of mini bike wheels add. I click on the add and very quickly think it is just some junk wheels and right before I click off I see something very interesting. The bolt that makes a 90 out of...

I have a large cap tank also with a cap, but it looks like helll.. I like the chrome one with the indian sticker on it from way back in the day.. :laugh:

I've got everything here for a VERY stout small block. Everything I'm going to list is brand new, never used, never run. It will come with a pump gas set up and a race fuel set up (2 cyl heads). Will also come with 2 different Valve spring set ups and 2 Different sets of rockers. There's 2 ways...

i bought something i think useable, its a dynamometer for small engines, according to what i could find on the internet, its a megatech dg-8, dynamometer generator with an electric brake. good for engines up to 10 hp and 8000 rpm. it should work for what id like to dyno but not for any real race...

Wondering what this small mini bike would be?

Looking for a Lil Indian small frame, not the bolt together type. Fork is not needed, just the frame.

When I was looking at Trailramdan's Pac Mule, I had noticed the chain was running under the jackshaft sprocket from clutch to wheel, the brake is located on the shaft and didn't like this arrangement, I knew before I bought it what I was going to do, I picked up a 16 tooth for the clutch side...