Earlier this week I bent up the tear seat mount and support bars. Welded up everything today and dressed up the back end a little bit with some expanded metal. Cut the front fender and rearched it today too. I think I'm about done welding on this thing now.
Well thought for a few days on how to make a expanded metal clutch cover and this is what I came up with. Made a template and cut it out and shaped an welded it up. Them I found a couple of junk recoil housings. Straighten out the mounting tabs for the front one and left the other alone for rear. Welded them in place and bolted in a couple clone plastic pull handles. I cut the metal behind pull starts and bent it up into recoil housings. Now I need to figure out just how I want to mount the cover to backing plate. Hope this is what you were kinda thinking Randy.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.