trail horse wheels ?

[mini one]

Figured I would put these here since recently someone was asking about this drum/rear wheel setup, hope this helps. This came off a suspended Trail Blazer but my Trail Horse is exactly the same.

I'm wondering if the changeable Kart type sprocket adapter OldMiniBikes sells for the DB 30 (or is there one for the Azusa?)can be drilled to fit the stock TH sprocket adapter/aluminum basket shown earlier in this thread so that they can be changed out with multiple 2 piece sprockets?

 

[CarPlayLB]

Here is a hub that fits the 5.25" split sprockets
https://www.OldMiniBikes.com/Uni-Hub-Steel-Zinc-Plated-1-1-4-Bore-1-4-Keyway-Plus-Hardware-Kit.html

I would think you could have the center machined to 1 3/8" to accept a standard bearing and then build an adapter to go to the wheels. That would also allow you get different spacing if running a bigger tire

 

[bikesisbikes]

Thanks, Mini One. I was asking about the brake setup. I just bought a Trail Horse Brake Mounting Bracket, (Ebay), and will certainly use your pics and others as a guide.