db-30

hey just completed my engine swap to 6.5 harbor freight engine.neighbor just burnt leg on muffler sticking out.anybody know,make or sell aftermarket muffler to fit this engine??how bout a straight pipe performance or something with more flow, sound,etc.thanks

I am chaanging this bike over to mild for my son in law ,, I really liked the way its exhaust turned out so here it is ,,,stock new style engine and all

I am about to stretch a DB-30 and would like to know the thickness of the main frame tubing before i cut it (I'm guessing it is .060), so i can buy the tubing I will need for it! If it is .060 than 3/4 should slide in fairly firm! Thanks, Paul

I have two stock engines with clutches Never used still have the oil in them , One needs a Throttle control but the other is complete , asking 40.00 each ,You pay shipping or come get them if your close enough , I dont have pictures at this time ,, Pm me with questions , Paypal ok ,, Need to...

What has not been done to a DB30 on this web site , well not much that is for sure , Seems like a inexpensive way to get into minibiking or if you like Mod the crap out of it and save a vintage bike ,, After reading about all the stuff that Promod is making for the DB30 I wrote to Brad and...

Anyone have a picture of the location of this screw. I've looked all over the Carburetor and didn't see one.

Any one know where I can get a set or 2

I have the 70 tooth and would love a 60 tooth, but don't want to make one. The older Doodlebugs have 65 tooth. Let me know. Thanks, Todd tdishon@hotmail.com

We have a long driveway but not much lighting. Are there any light kits out for the DB-30?

I have a couple DB-30's with the HF 6.5 motors. I had these headers on them. One with the small muffler and one with the larger one. I needed my motors quite so I modified some other. I will sell all of these pictured for? They have about 5 min running time. Serious. Once I bolted them on, I had...

I have a green DB-30 for sale with the 6.5HP Harbour Freight Honda clone installed using the kit sold by cjtmini. I have also installed the pocket bike rear hydraulic brake (direct bolt on). Comes with the original tires in new condition - bike is less than 1 year old and hasn't seen much use...

I have the red DB-30 and want to paint a couple parts to match the same color. Before I go and start buying some different reds trying to match, does anyone know if Krylon or Rustoleum has a color to match? I figure someone else has been down this road. Thanks for any help

Ok, ok. Everyone has discussed and shown how to crack open the case and remove the centrifical weights and shaft of the governor from the clone and then plug the case. (great write ups by the way) My question is: Why can't we just disconnect the arm on the outside so it's not functioning...

mini bike baja brand new

Check out pics of my latest DB-30 build more pics are posted uder the " mini bike project" section

I picked up a DB-30 new from Murrays for $169 and wanted to build another custom. This time I used a Honda GC190 engine purchaced from Small engine Warehouse. I liked the look of this engine and they run good on my lawnmower and snowblower. Check out the pics of the build. Starting with...

What are some of the different ways in which you guys are using to control or adjust your chain tension after an engine swap? I swapped a B&S 3.5HP I/C engine into a DB-30. I think that the standard Briggs & Stratton engine configuration is probably the least well suited for a swap into this...

A good looking & functional chain-guard appears to me to be the most difficult part of this swap. Let's see some pics of what you guys have come up with. Details on how you fabricated the guard would be most helpful. Thanks ~JM~

Huge Mini Bike Parts lot I called the guy & it sounds like he bought out the parts inventory from a local sporting goods store. He does not have any bare frames or rollers. He does have a few complete bikes. Sounds like he has most of the parts that attach to the frame. I do not have any...

ok just got the green duddle bug (i know my spelling sucks but i don't relly care) from dicks. yesterdayi put it together was a little bit of a pain but preety easy the oil drain plug was in the worst posion i took about 10 mins 2 unskrew it then puting it back in took 2 or 3 min. then i got gas...