help.

Trying to figure out what these wheels are off of. They are on a frame I purchased which I believe to be a 1959-60 Hoffco Hurricane. Want to know if they are original to the kart or whatever they may belong to. Thanks! Front wheels. Rear.

This is my first post, so, "Hello Everyone!" "LONG VERSION" (for short version, scroll down) I picked up a junker Baja Heat a few weeks ago for $50. It didn't run, but was fairly complete. I then bought a Predator 212cc engine to drop in it, since the factory engine needed some work and...

What is the Frame and fork? Brand ? Model? Same Bike Blue before Green after. Thanks Jeff

Okay so the time has come to paint:laugh: Iv never painted a mini bike before so I figure I need to know 1. What to strip paint with and should I sand?(I've been told jet fuel I think it's called works well and what # sand paper) 2. what type of primer should I use and how many coats. 3. I want...

Does anyone have pictures of what the Intek 206 throttle linkage is SUPPOSED to look like? Mine does not seem right and the paper clip looking spring doesnt seem to do much. Or a picture of how they have theirs hooked up to a throttle.:hammer: I ordered a replacement carb cuz this one floods...

Would like to know if anybody has seen one of these and what make, model, approximate year. Thanks!

Hey guy's, I picked up a bird mini bike and I'm in need of a 5" rim for the front end.The bike came with a 5" rim but its a split rim with a hub and not what a bird should have so LMK if you can help, Thanks...

I got a cat eliminator project my first mini bike. and i posted here about it and the feed back i got was very helpful. but due to what i was told about the rare and very hard to find rear disc brake caliper . i need help. mine is missing the caliper, mount is still there. is there any way to...

So we modded our minibike just to make it up this hill. Our MB 165 pulled me and my son 270 lbs combined up this hill. He was cheering when we got to the top, here is our view. We jetted the carb installed header and bullet muffler High flow air filter Emulsion tube and it's a beast...

Could I set it for any direction does it matter? Thanks

Here's the final product from my cleaning, painting and part replacement project. The tank and fender will have to wait until this winter. My son wanted to get riding and wasn't going to wait any longer. Probably logged 6 hours on Saturday. Thanks to everyone that helped me with this...

Sent from my SCH-I545 using Tapatalk 2 I got a new 212 and need to know if it much trouble to connect the throttle,and what do I need to take off?

Hey guys I was just curious what the fastest engine for under 150 bucks I could buy. And if anyone has one for sale that's over 7hp. Thanks for the help everyone Sent from my LG-P930 using Tapatalk 2

Hey guys I got a brand new Yukon trail mini bike on a trade but I can't find anything at all about it. If anyone knows something about these things please reply Sent from my LG-P930 using Tapatalk 2

Ok, it's getting late and I'm getting frustrated. I am trying to put the throttle cable through the screw/nut thing but there's no hole. Do I need to turn the screw and hold the nut with a wrench? I tried it but I started to strip the screw. I searched but I couldn't find anything about...

I recently acquired an owosso trike roller. Came with motor. However, it is missing a transfer bracket. To connect the engine to the axle! I was hoping somebody had an extra laying arou d that they would sell. If not, could somebody post a few pics of one so i can make one? Any input and...

i have a 5hp briggs funpower that i turned into a raptor with a raptor piston 107ss dyno cam, stronger valve springs, billet lifters, rod and flywheel. as well as a header and a boared out older style pull choke 3 bolt carb pulsa jet carb. the pull choke has been removed, butterfly now opens...

Hey guys. I'm new to this forum. I have a mini bike idk what brand it is. But iam getting it professionally painted orange and black. I want new rims. Nothing fancy with paint because I'm powdercoating them. What rims would you recommend? Also I have the predator 212 cc motor. I have found a...

I can go pick this up for 30 bucks just wondering what it is.

Ok, Here are some pics of the wheel that is on the back of my Rupp Continental Special. I know it is not the correct wheel, but I would like to Identify just the same.