luck

Yep, another new guy here. Trying to find some info/expertise on my Fox Sprite. Getting this message no matter what. Post denied. New posts are limited by number of URLs it may contain and checked if it doesn't contain forbidden words. Not posting any urls Or naughty words. Or maybe 'forbidden...

So my co worker just comes by banging on my door at 10 o clock at nite I'm in bed going to sleep. He says come to my house so I ablige and go there after getting dressed of course so I get there and there are three bikes in the driveway and of course I recognize all immediately one first gen z50...

Here's the new address

I am considering selling a Benelli Buzzer that's been sitting in my in-laws basement for the last 40 years (it's always been inside) except for the 341 miles put on it back in 1971. I've looked everywhere to find out what it might be worth without luck. Any ideas or suggestions? My other...

A friend of mine is selling his Super Bronc 3W three wheelwe He had this at Ann Arbor a few weeks ago, but didn't have any luck selling it. He's lowered the price and is hoping to move it along. Custom Vintage Heald Super Bronc Trike

This is my computer generated photo / sign, I did not want to lay out all the parts in the Snow. :laugh: . . If You wish to look at the start of this story? Go To the Thread > http://www.oldminibikes.com/forum/project-logs/95845-mini-drag-bike-build.html It is basically a collection of parts...

With three kids under the age of three! And a new job, I don't know if I will get this build off done by May? But we will see how it goes! Good luck everybody!

I'm building this for my wife. Good luck everyone.

I just got this on eBay. It's 10" x 5 3/4. The fuel inlet is 1 3/4. I need to locate a cap for it. I'm not having much luck. It is the twist lock style of cap. Ideally I'd like a vented chrome cap.

Ok guys I've been having super bad luck with motors this year I just bought a box stock project last week the mods are 22 mikuni Billet rod Arc flywheel 18lb springs Custom header And the first 2 days I had the motor it was flying, I was dusting my buddy's bike by a lot, but then...

Bonanza Mini Bike Wheels | eBay

Yesterday i received a new bored out Honda carb for my HF Predator 212. The problem is the gaskets they sent didn't match up with the carburetor. I tried the supplied gaskets and a set of Briggs gaskets and could not get the motor started. I wasn't sure if it was the jet or a compression...

I no this may not be a big deal, but when you live in the desert wasteland of minibike's any find you make is a good one. A 5.5 clone costs about $235 or a cheap water pump $205. So I walk into Adendorff and theres a pump lying in the scrap section - I asked whats wrong and get told it's...

One day left. I leave for Barry in the morning with the mini in the van and we race Saturday. This years king of pain will be the same as previous years 4 stages for a grand total of about 2 or 3 hours racing depending on weather and conditions. This year it looks dry and should be fast...

Head outside at 5:30 AM to go to work......open car door ,....no dome lights came on.......next thought was will it start?.....THEN I noticed the smell....smelled like a house fire.......then I see it........the whole center console is melted and ran all over the floor ect....So I popped the...

I have an engine that i need help with ID., well not really ID but some more info like what cc or HorsePower any info is appreciated. The plate on the engine reads ::: Power Bee, Chrysler outboard corp, Two-cycle engine. Engine Model 82030 Engine Serial 7432 Hartford, Wisconsin USA Thanks !!

I posted this originally in the General mini bike section, but thought I should move it to the Project log. I'm in the process of tearing down my lastest mini bike and it seems that everything I try to do, the bike is fighting me on. I had to walk away a few times or the bike would have...

I am SICK and tired of maintaining my stupid weed eater bike. so I ripped the motor off of it, a homelite 25cc 2 stroke. runs just fine but there a few minor things. the heat dam is cracked. not on the intake, just where the bolt holds it on, I JB welded it but it opened up on one side again...

my GF jenn has been complaining about stomach pains since sunday. well tonite it became unbearable for her, "jen get to the hospital". i just got a call "10:40pm est" that she just got into the ER, she has been there since 7:30pm, WTF. she said that her grandfather just showed up with similiar...