modified

any good? too big? too small (cfm) im not worried about getting it to bolt up, i have a well equipped shop and can fab something. im going to port the intake and releive the valve area, 94ss cam, thin copper head gasket, header. just wondering if it will be too much carb. before anyone suggests...

i don't need my AGK .265 modified cam anymore so it's for sale. it's got a bunch of hours on it but is still in good shape. i'll take $60 shipped for it, or if you're feeling cheap and are on a budget i'll let it go for $30 shipped. Paypal, cash, money order, i really don't care. you must...

Hey all, I got a clone with 9.4:1 compression ratio, mild cam, 22 mikuni on gas, I was curious what timing some of you out there are using. I was thinking in 30 degree range, has 28 with straight key on arc flywheel, 34 with 6 degree advance keyway, I am gonna lap the wheel and run no key. thanks

Or some people might say hacked up. lol its for sale locally, was thinking about looking at it. [/url][/IMG]

my strait pipe was a little loud for city riding. went to tractor supply and got a briggs and stratton muffler for $9 and a 1" strait thread end and a 3/4" to 1" addapter. was all together $14. when i got home i went to put it on and the inner linner came out and i thought why not mod it. i...

Here are a couple of vids of the bikes that we put together this winter. Really happy with the power and power delivery. YouTube - 7Sonic7's Channel YouTube - 7Sonic7's Channel

how much power increase would there be between the .265 (stock carb cam)and the modified .265 cam.i bought the .265 cam when i had the stock carb now i have a 22 mikuni and was wondering if the added duration would be worth the expense or a diffrent cam altogether.clone has a flat top...

I don't have the time for this project anymore, plus I need the money for my other toys. I bought all the parts, installed them but never had the time to get it running and enjoy it so I'd rather sell it to someone who could use it. I'm located in Bel Air, MD 21014 and I'm asking 500$ All the...

wildman asked me to do some tweaking on his frame to change a few things, so here ya go......i'm sure h'ell chime in:thumbsup: mark

who do yall recommend for big valves in a flatty? need all the machine work done. mark

I got this kit : Modified Throttle Kit, www.bmikarts.com : BMI Karts & Supplies : Go Karts Parts : Racing Go Kart Parts : GoKarts : Versailles, Ohio : USA : Indoor Track : Tips but i'm unsure how to install it properly. does anyone have any pics that may help?

This is my second Doodlebug, the first one(still have it)I put a 5hp honda in it. I bought this one and immediately put in a 7hp. I started breaking the stock chain, so I bought Extreme RLV for both bikes and haven't had a problem again. I made a spring tensioner for the chain. I just put on...

My fiberglass guy thought he'd try something different. He took the basic Bonanza chainguard and made a mold for this design: . . He put his company logo "SU"(Spoilers Unlimited)at the rear of the cover. $25.00 Delivered. Paint it up fancy and it might look pretty nice.

New member here..............I restored this taco 22 It has a mild cam, aluminum flywheel, and header, with 8 degress advance timing, clocked at 50mph may go with the big valve head and carb next.......oh yeah cant forget the much need billet rod..............:biggrin:

I took my bike out today for the first hi speed runs since I built the new motor. Had some scary moments in high rpms as I felt the front tire wanting to pull off the ground around 5K. motor ran strong to say the least. On the last pass, when I let of of WOT, the motor instantly died. I...

I am selling my 6.5 Clone. The following modifications have been done: -Governor Completely removed - Grade 10.9 Sidecover and Head stud kit - Low Oil sensor removed - .265 cam w/more duration on the intake - Flat Top Piston - File Fit Rings - Arc Rod and Bearings. - Billet Flywheel - 18 lb...

Briggs Raptor 3 ARC Billet Flywheel ARC 4.5 inch Billet Rod - new Wiseco Piston .015 over - new Dyno 98 EXP cam - new Walbro World Formula Carburetor (alky, comes with gas jets too) Will replace with Tillotson HL368 or gas carb if preferred. Billet lifters Professionally built engine. Block has...

I cut the new DB forks for the Arco lowers to go onto, I used the upper spring cups off the Arco forks as the bars on them were bent badly. I got them free after carefullly torching then grinding the excess material away, I slid them onto the freshly cut DB forks and am waiting to weld em. I'm...

I know alot of talent is on this site and I'd like to see some of the things you guys have made. I'm only really interested in things that take a good amount of fabrication not bolt on, store bought parts. Custom minbike/trike/gokart frames are very cool to see and is the reason I am here...

So I've given up on tuning this damn mikuni carb and I've decided to sell my whole engine set up and go for a Lifan 125cc off ebay. The engine is from a Baja Warrior, its got: -Billet rod -14cc head ported & milled .065 for a 12.4:1 compression ration(this is a clone head from NR Racing)...