muffler

Trying to get this muffler off. Is the nut reverse threads? This has been soaking for months and I still can't get it off. Any help appreciated. Thank you.

Putting my MTD model 520 "ugly" bike back together and I have a early 80's HS50 Tec that could really use the correct slanted intake manifold and matching slanted Taylor spark screen type muffler. I know that these bikes used a muffler pipe extension that fit over top of the can on the taylor...

Lovingly used, It was NOS when I put it on my bike, bike was together for about a year with only occasional use for runs around the hood mainly. It is from a late model factory chrome kit that Tecumseh had, its good chrome, does show some bluing in the hot spot but it should not get any...

Had this forever and dont remember what it mounts to.I know its for a small frame Tecumseh but not sure if the position of the flange and curve of the tube are specific. Any thoughts? Thanks.

Tired of looking at your 5hp sausage muffler? Does it distract from your otherwise beautiful mini? Here's a solution that can take many variations all for under $12. Ingredients needed: 1-sausage muffler 1- 2 1/4 x 2 1/8" auto exhaust reducer/adapter and 1- 2 1/8" auto chrome exhaust tip...

Here are a few pictures of my home made super bronc vt8-12 muffler. I made it out of 3 inch exhaust tubing and 3/4 inch tubing for the inlet and exit pipes. I cut out and welded 2 discs into the inside of the exhaust tubing with holes drilled randomly throughout to equal the volume of the 3/4...

just picked it up today. its 22 inches long and has spark arrestor, and number on it.

Got it with the intention of using it but I'm downsizing and this engine will not be used. Has a scratch on the air cleaner cover but otherwise shiny new. I got a powersport throttle for it and it came with an NOS Taylor curved muffler with directional tail pipe. PM me for pics or I'll post em...

HORTZMAN-KRIZMAN SPARK ARRESTOR CHROMED "US" Forrest Service Approved Model HE-2 Length aprox 10" Diameter of muffler 1-5/8" Threaded end 3/4" pipe Thread Brand New NOS unused or mounted $100 plus $12 Shipping Cant Load Pictures /Will email upon request

I have a 3/4" pipe thread sausage type muffler on a header attached to a Greyhound 6.5 HP engine via a 24" header. The original muffler cannot be used due to the placement of the engine and air intake. The original muffler was very quiet. I need a quiet muffler,even if I have to weld it on the...

Here is a shined up pit bike muffler. I thought it would be cool for a mini, but I will never get 'round tuit! $30.00 shipped lower 48 willing to trade for needlepoint items only

not finding an exhaust I liked,not being a welder I usually have to think of alternatives..I took a 3/4" floor mount a 3/4" 90° elbow and a Briggs style muffler...used cut off blade,shaped the floor mount,had to slot and grind sides of flange a little so nuts would clear...rode with shorts...

Hi guys. The Taylor muffler has about 1/4" clearance between it and the vinyl. I don't plan to ride it but once. As I do after every restore. Then I set it next to all my others. However, I do want to make sure it's ok. If I ever sell it. Thanks and please let me know if you think it will...

Would like to buy a Taylor muffler for a Tec H70. Thanks

Would like to buy a Taylor muffler for a Tec H70. Thanks

Hi, I would like to add a muffler to my mini bike, I have a predator 79cc. I also need help buying a new brake caliper. Thanks

Does anyone have one they can part with,(stock muffler) to help a cool guy out that I sold my stretched Doodlebug to? His neighbors are complaining now so I'd like to help him quiet it down a bit. THX---Steven!!! That's the exhaust I made that's too loud!!! I told him about the site...