options

I've spent weeks and weeks looking into this and have discovered sadly nothing currently is produced? mb165, mb200, motovox, Honda wild money Z50 or something like that .. There's obviously a million ways to go, but I want to find the easiest and cheapest. The stock head stem likely has to go...

baja warrior, predator 212 hemi, tav2 clone. bike is a trail bike so i won't be making speed runs. i've already hit 40mph and that's fine. planning on leaving the govenor in tact. i want to have an open exhaust and a high flow air filter. i know i will at least need to jet my carb, but should...

Unfortunately the original carb on my 1972 DMP Scamper with the TEC H35 engine is shot. Someone over tightened the LS needle and broke off the metering tip of the needle in the carb body :censure: I hear no check ball rattle when I shake the carb body and the throttle shaft has a good amount...

Pretty much done with Tecumseh float bowl carburetors on a H50. Has anyone experience with other carburetors working acceptably on an H50?

Morning, While some may scoff at the thought, Im keeping my 97cc on my Dirt Bug. Its piped and jetted, but I still hate the factory carb. I considered getting an actual G100 Honda branded carb, but wonder if anyone has experimented with other carbs? I remember a YouTube video of a guy with a...

My little Cestad/Monkey ward has the aluminum Astro wheels, which are a 5 star with 5 lugs.. I ordered a blank 60 tooth sprocket and attempted to drill it, but it's egg'd(?) and slops out//tightens the chain depending on where it is in its rotation. The 72 tooth sprocket that was on it when...

Hey all, I'm on to my second mini bike project and have a question about seats. My other machine is a DB30 and the stock seat is fine. I just picked up one of those coleman ct200u mini bikes and the stocker seat is a little on the hard side. So my question is do I open the stock one up...

Hey all. I had a 3.5 brigs model 91212 on my manco and swapped it out for the predator a while back. I no longer have the gas tank for the brigs. I was wondering if someone had a source for brigs parts or had one laying around they would sell me. I have seen one or two new online for like $60...

Currently have a Tecumseh 6.5. Looking to replace with predator 6.5. Possibly with a few extras. Simple upgrades or reasonably priced prebuilt? I have seen a few options on engine types such as hemi or non. Obviously the kits are different. How complicated are these builds. From stage to stage...

So, what are the best/most reliable carb options to run on a stock Briggs 5hp with a remote gas tank?? Thanks

I built a predator 730 with a +.040 billet rod, hemi piston, black mamba sr cam, billet lifters, cm pushrods , champion rockers, and sanded the head down a lot . Well I went to test ride this motor on the doodle bug and it ran like a beast for about 10 minutes and I started making popping sounds...

Looking for some aftermarket 10 inch wheels. All I can find is the azuza which I think looks good but I heard they get wobbly after they start getting miles on them. Anybody heard of this? Or know of any other wheels out there? I'm looking to run like a 10x3.5" tire and not really looking for...

Alright guys first post!! Got my first mini bike (doodlebug with baja 97cc) from a buddy yesterday. It came with a busted up hydraulic brake. I believe it is the one everyone uses around here, single piston. Well I didnt want to pay 30$ to get a new lever and new pads so I started hunting...

So it's time for a new project and I'm thinking something with big balloon tires for the sand/snow. I have my eye on a kit from Bad Dog, the gigantic balloon tire model. Was gonna put a mildly modded Predator with a TAV on it but the costs add up fast when starting with a pretty pricey kit...

i have a murry i am playing around with it has a tecumseh 3.5 ( needs carburetor) but i do have several clones and flat heads. any suggestion on what would be a good options for playing around . thanks mike

though I like minibikes this time the question is for a mower. So is the only option for a warped fuel tank the roll pin and nylon washer(B&S repair part) or replacing the tank, are there any other options

Working on my h70 bronc. Found this Crack below drive shaft. I'm a novice and I need to know what my options are moving forward. Picture is posting upside down-not sure why... thanks in advance!

Working on a Huffy Hustler weighing my options. Thanks! Kevin

Back when I bought two, only one had a seat, so while I doubt I'll find another, I'm looking at my options. This is similar Tall Seat Honda XR50 CRF50 50cc 70cc 110cc 125cc Dirt Pit Bike or this Classic Retro Vintage Replica Bicycle Bike Leather Saddle Seat Brown I'm trying to...

I wanna build a drag bike looking at all the options out there what is a good motor to start with ? Also looking at frames only one I came across is the nitro 44 any others out there I just would like some opinions before I start with my build thanks