rings

Bored, and wife is angry with me so I am hiding.. Noticed Hastings has listings for all the Clinton engine ring sets. Kind of handy isn't that? I need to see if they have clone rings and file fit sets that may fit the new 70mm pistons. Manufacturer of Hastings piston rings including Flex-Vent...

Anyone here work on a Jiangdong 5.5hp motor and used real Honda parts to replace worn out parts? I'm rebuilding a Jiangdong and need to replace the rings. Question is will the rings for the Honda GX160/200 work? The motor has the 3 piece oil rings setup. There is Ebay item 161178429487 I would...

Part number 28987. On back order via OutdoorDistributors for a month, and just found out "they're in production."

Yea I have to rebuild my 5hp briggs and its a 131202 I belive and I'm also intrested in a whole set of both valves if in new condition. I must be able to lapp them too the seat:shrug::thumbsup:

Well, I am stepping into parts unknown.:laugh: I am putting new rings in a little 5hp Briggs. Do you have to use one of them fancy ring expander tools or is there a trick to this???

Hey all, I have several different ring sets for sale. I understand some of these may not be minibike material (although who knows what some people may put on a minibike for a powerplant). If you see a number you can use let me know. I would rather sell a number completely at one time, but it...

I'm rebuilding a 5hp briggs motor and my briggs repair manual says not to hone a cool bore aluminum cylinder :shrug: but it doesn't say why. I want to clean up the cylinder and replace the rings and do a valve job on it. How do I replace the rings without honing the cylinder? I though a...

i just bought the wrong pair of rings, their 1.00+ os and the guy i bought them off of has another pair of z50 rings that are specified for a 1982 z50r. does the 1982 rings fit on an old 1969?

1973 Harley Davidson X90 90cc <?? I am rebuilding one of these and broke the rings when assembling. My parts list shows they are part # 22350-73 (standard size) Since this is a stock engine that should be right # ??? Can't find them anywhere. Now I do come across a set of...

I have two sets of new Briggs standard 5hp rings part# 298982 $15 shipped

Hey guys, i bought a 6hp Tecumseh Power Sport motor from a scrap yard for 7 bucks. Looked complete but was low on compression. I tore it down and found that it had water in it at one point. I cleaner everything up really well. Found that the valves weren't closing all the way because they were...

Anyone got a set of piston rings for a HS-50 ? I've got one that I'm in the process of rebuilding and that's all I'm lacking. Vic

hi, just wondering if any one knows any tricks to puting rings in a cylinder without ring compressor?

i found this an im not sure if im right Tecumseh OEM Ring Set .010 40007 im not sure if it standered or .10 .20 model H35-45234F SERIAL 9175 03553

I have just acquired an italjet that I had as a 4yr old. It needs new rings (39.2mm). Do y'all have any recommendations for a supplier. I have messaged a seller on ebay that is offering Caber rings, his feedback is very good. Any thoughts on Caber rings? It has been pretty difficult...

i have a honda gx200, just getting started building it up tonight, i hope. i need someone to help me out with installing the new rings, i have never done it before. there are 4 new rings in the set and i have no idea which ones go where, or how big the gap should be or where the gap should be...

Put in new ring and piston. Compression is at 65lbs holding. Checked and rings were placed correctly. With proper gap. I replaced the valve springs. My old springs were different heights and the motor specs call for different springs. Comp cams sent me the same spring for each valve. ? The...

Broke my connecting Rod. Got a used rod and piston. The cylinder looks great. Since im not touching the cylinder should i reuse my old rings or buy new rings? Not a steel sleeve so what type rings? I Got new gaskets and cleaned every surface with brass drill brush. This is my first...

So I am about to tear down a tecumseh for a rebuild and paint. I will not be replacing the rings however as they are in good shape, compression in the cylinder is good. My questions is, if I remover the cylinder to strip the paint from the block, is the seat on the rings ruined? I mean, when...

I figured out the hard way that a GX160 and a GX200 piston aren't entirely interchangable. Since I already have a 160 flat top piston, I thought I'd save some money on my 200 build. Guess that was a mistake. The piston fits the bore, but the rings from AGK don't fit the stock GX160 piston...