slow

  1. B

    Mikunis slow to start?

    converted my Honda (basic almost stock from oem parts) to mikuni. Takes 4-6 or more pills to start now. Tried several jet combos without much help. This is on a mud motor and it makes it a major pain. Is this the nature of mikunis? Or should I be looking for a problem? These motors ime, start...
  2. M

    Lose power in take off need help

    So my buddy bike lose power in the take off he said he rode it yesterday and it was fine but today it's taking off very slow. What should we be looking for.
  3. Broncco1978

    Slow broncco! Help!!!

    Hi there, I am new to the minibike thing and I bought an old Broncco and after measuring the engine plate, I found that a 6.5 212 Predator would not fit on my application due to the clutch not lining up with the rear sprocket. I previously installed a 79cc on my daughter's go kart with a...
  4. vegascharlie

    my first minibike

    My first minibike in 1980 had no brakes no throttle (wide open all the time with a spring) a direct drive sprocket on motor. (no clutch) Straight pipe exhaust. Piece of wood for a seat. I dont even remember what brand minibike. It was the neighborhood scar maker. I would pick up the rear...
  5. D

    predator fast slow fast slow fast slow

    Dont know how to explain it..all stock except air filter exhaust and new jet. At full speed it cuts out a little, then revs back up, then repeats. What is it?
  6. incogrhino

    been slow lately...

    Picked these up over the weekend. Power dyne rail... And a moto skeeter.... And the hoarding continues.....:out::thumbsup:
  7. manchester1

    Site running slow

    Is anybody else having problems with the site. :out: The last few days been very slow, won't load and disconnecting me. :shrug:
  8. B

    Slow at work lately

    I had to find something to keep myself busy.
  9. YOOP

    site running slow

    seams like the last couple days this site has been running slowly.:shrug: every other site I go on runs fine,anybody else having issues?
  10. 93notch408

    preadator slow after cam install

    i just got a black mamba cam and 26 pound springs installed them in my bike and it lost some mph over the stock cam and stock springs mods are: aluminum flywheel 4 dagree advanced header pipe but its kinda short 90 jet in the carb air filter and adaptor black mamba cam 26 lb springs...
  11. Miniwood

    3hp Tecsumech kinda slow

    put a little 3hp Tecumseh on the bird frame. The governor is bypassed but its still kinda slow. Just the nature of the engine? Had my stock doodlebug engine running stronger than this one.
  12. bigrob

    Slow Poke wannabe DragBike

    Well I guess I'm in!! Open Class I have been drooling over some of the drag bikes you guys have been building, so this is the excuse to build one. I will be scratch building the frame , and will use a 16.5 -6.5 - 8 trailer tire for the rear and a 13 -5 -6 for the front. The engine is a...
  13. mr.modified

    You know your computer is slow when...

    This is the slow computer joke thread. Make fun off how slow your computer is. I know my computer is slow when I have to read old issues of hot rod magizine while waiting for the next page to load. I'm not kidding, my home computer is really that slow, and I have a stack of hot rod magizines...
  14. toomanytoys

    Mini hobby slow down...

    Wife came home from work yesterday told me they fired everyone in the medical office they work for. Had some BS excuse that they weren't performing to their expectations. Just so they wouldn't have to pay them unemployement. They are getting together and fighting to get it though. My wife...
  15. K

    Slow off the line with max torque clutch

    I have this max torque clutch http://www.affordablegokarts.com/mm5/merchant.mvc?Screen=PROD&Store_Code=A&Product_Code=SMFKC**&Category_Code=PCJ After doing some reading it seems like there are different max torque clutches. I guess the max torque that I have only stalls at 1800rpm, which could...
  16. B

    Slow Take off

    Hey I am wondering is there anyway i can speed my take off speed up. I am using a Live Axle kart and when i take off it is like a slug.. It will barely go. I am wondering is there away i can make the take off better?
  17. awkwardkitten

    5hp briggs idles waaay to slow Help please....

    Ok so I FINALLY got my mini bike up and running today! I take it for a few rounds around the block and I study the engine a little. Number one. I have to revv the engine at least a quarter throttle to actually get it to move forward, Number two, After I let go of the throttle, the engine will...
  18. T

    Slow Build

    This is my first custom build. I'll post some pics soon. (After I get my son to show me how to get my pictures from my phone to my computer. I'm not too quick to learn the techie stuff. I'm more of a hands-on person.) I've been real busy working evenings and weekends on the website so I...
  19. mybiz

    when is it going to slow down?

    Winning bid:US $366.99
  20. K

    wow! slow down mom!!!

    mom took the DB 6.5 on a ride today.. she got out of hand! haha :scooter: MomRidingDB.flv video by kbaum84 - Photobucket
Top