spot

in search of please call 317 340 5953 or just reply here thanks

Want a little more torque and the stock carb is jetted but seems to have no response down low. The motor is a 6.5 Honda clone 196cc I believe, the motor has a small cam bp2 cam and a .10 over bsp rod. Motor has good mid range torque but I would love to be able to break traction as soon as I hit...

Well looks like I found yet another toy. Too bad I cant keep it, but its going to a good friend who is in our club so its not going far. He has been asking me to find one for awhile now. At least I will get to ride it haha. Even came with a dealer break down and brochures for most Sperry rand...

so I've purchased a fat tire kit the frame and forks are straight, the welds are pretty good I used a lathe to make the axle spacers spot on frame back from the powder coater, it's a bit darker than the sample making a 1-1/4" spacer to fit under the adjustable engine plate

Hey guys I'm new to this forum but I've used it as a reference for practically everything I've done and there are some great guys on here! I have a 72 Suzuki RV90 VanVan that runs great, except for one thing, about half way through the throttle it seems to have a dead spot. I will be...

Thought I'd share ware I ride at. :scooter::thumbsup::pimp::shrug:

OK It may be time to admit I have a problem. I was in our spare 1970's bathroom "dropping the kids off at the pool" :wink: thinking man that bathtub is just wasted space, I bet I could fit a minibike in there and with the curtain you would not even see it :thumbsup: So yea, this has...

Just a little expert help at spotting a minibike frame that may well be more scrap metal than you thought. Just More Scrap Metal 6-16-13 - YouTube (Yes, That's a Cat kickstand in the video)

I am running a MAXX series 208cc 3600 RPM 6HP engine. It is mounted in my Bonanza BC100. It starts right up easily. When I take off it runs smooth up to about 15MPH then I get a flat spot in the acceleration. I get past the flat spot and she really gets to its higher speed nicely. I am...

I scored this beauty on ebay for $150 :thumbsup this will work fine on the tabs i need to weld on the fenders for the project!

Im not going to be casting any of my existing covers so that I can work on some new product, a member suggested that the drag bikes needed a cover and the ones I have wont work. I think he is correct, for me to leave this area without a product does not make good sense to me so lets make one or...

I put a lot of work into this bike but I just have to many, I couldn't stand the flimsy stock forks on these, this has a brand new extended fork with stainless 1" tubes, all new beefed up scuff brake, 2 pc. 6" rear wheel with one pc. Bird hub/sprocket, go-cart slick, 6" new one pc. Steel wheel...

Sorry about the post!! in the wrong spot If I only took my time to read your postings I wouldn't need to do this !!! FRANK

dont know how far this will go, but, i thought i'd start it up. I just heard that charles "pizza boy" "wildman 500" went down today, not sure how bad, heard a possible broken shoulder:shrug:...... keep him in your minds, please......:thumbsup: mark

got this light but can't find any info on what it was used on...motorcycle? cars? bicycles? I'm only guessing that it would be from the 50's or earlier... It says on top: Pike fender spot light The Pike labratories ltd Newaygo, Mich U.S.A

Hey dude's what up? I wanna play a little "I spy" game.... any one wanna play? great! lets get started...........There are 8 Modifications to my bike in total; some are obvious,some....not so obvious, good luck! All modifications are external,so internal engine mods don't count. The lucky...

i think that we should start doing what MDB and Solo Cali do on the west coast, even though we probally wont go as fast as them, i still think it would be awesome to start drag racing out minis and building some fast baddass motors. im going to start looking around for long smooth streets and...

I have come to the conclusion of not racing anyone for the new year. I'm just gonna run ride my bike up and down the street and give advice like normal. The reason for the change is all this local BS crap talking everyone does. BUT hardly anyone ever races. You have to basically "BEG" guys to...

We will be out there testing our new clone build. It should run ok but we will see. Meet us out there and see how it does. I will also be bringing a case of AMSoil with us for those of you who want it. Looking forward to seeing all of you guys out there.

The art of buying, just the right, christmas gifts for my friends and family is something I have never mastered. Any ideas on good christmas gifts and or links would be great. Please !!! Help me keep my hobby alive.:laugh: