stock

Is there anyplace that actually has a mini bike style throttle for a Tec HM80 in stock? I found them a few different places but nobody seems to have them. Any help would be appreciated. Thanks..... Jerry....

What's the best mods you have done to a predator 212 carb or gx200? Or most you have bored the stock carb? Is 0.700 too much for the Venturi?

Hello guys, I'm curious on selecting a sprocket front and back on my doodle bug. To start out I've got the 212cc predator engine and just received the OldMiniBikes stage 4 hemi up grade performance kit and I add the ARC billet fly wheel with it so when I remove the governor, I'll be on the safe side...

Just checking with you guys before I order my parts ROD - Im using the stock piston, what size rod should I get VALVES - will the NR stainless 27mm/25mm valves fit in the stock head seats PUSH RODS - is 5.440 the correct length for use with stock rockers Any help will be appreciated

Does the stock 212cc Hemi Predator engine have more HP/torque than the stock 196cc clone that comes on the Baja Warrior? If so, how much? How noticeable is the difference when riding? Am I better off modding the stock 196 or would I be better off getting a 212 Hemi Predator and modding it...

Looking for a plain steel mount for Westbend 580/700. The mount I'm looking for has a lip rolled up on one edge. From what I can tell this was an early stock mount, not aftermarket or racing stuff so it might be found on some industrial application engines. Cash or trade...Send PM please...

To extract that miniscule amount of rear-wheel HP, I don't have my stock MB200's headlight connected. I usually ride during the day and thus don't need it. The few times I rode at dusk/night, the light was sooooo weak that is was practically useless. Plus a others have pointed out, it is AC...

New, never used, 3/4 shaft, reversible..can be run inboard or outboard.. stock stall is 4300... 14 tooth #35 chain $80 plus shipping

hand bored to the max .690+ reworked fuel circuits, jetted for pump gas. doesn't have/ need a choke. 1 pull starts. will add about 1-2hp over stock.

I plan to run a stock Predator Hemi in a DB30. I am going to use a 13x6.50x6 Pocket bike tire, sprocket adaptor, and 60 tooth split ring sprocket. What kind of performance might I expect ? Will it do 35 mph with good acceleration. I know most people like to modify their motors to go faster but I...

No governor, header, intake, valve springs, dyno cam , arc rod All modifications have been done above..looking to update carb from stock... Would a 22mm mikuni carb be a fit or what?

If anyone is looking for a bored or stock appearing carb, i can make them. I'm very reasonable on price. Pm me what size you need and ill shoot you a good price, i do it all for fun but i do have to cover parts a little bit of my time. I bore them, rework the fuel circuits shaved throttle shaft...

Hello, I am having trouble getting my GX120 to idle and it seems to be getting choked out at WOT. I had to replace the carb and the most readily available one for me was for a GX160/GX200. it has the stock jet in it but I assume it is the stock jet for a 160. has anyone had success with a setup...

Is there really a huge difference between the two engines in stock trim?

I have the stock engine with the governor being disabled and it gives good power, just looking for a little bit more. What engine would you recommend for a swap? Do not want a predator, maybe something smaller and what other prices besides the engine will I need?

good used 14cc head . just needs a good cleaning . complete stock head $50.00 shipped i will throw in stock flat top piston (has 3 dings on the face but should be fine ) lifters,stock rod,push rods,stock cam if you want those aswell:thumbsup:

10" spoke wheels front and rear. Technically this is new stuff, but sat has some damaged chrome. Tires are Cheng Shin "highway" 3.50x10" street tread rear wheel is a San Remo (italy) 20 spoke with 40/41 sprocket, the chrome is pretty nice on that one few small spots but very presentable...

I'm just learning about carbs and how to build up a motor. When should I consider getting my stock carb bored out? Besides the air filter and exhaust, what supporting mods do I need? How much performance is average on just boring the carb? How much do most shops charge to bore a stock carb?

Working on a father/son project. Used kart has a box stock project motor and we are replacing the kill switch. I ordered a new one from BSP but the lead are different than the one that we took off the motor. The old one has two leads - one to connect to the coil, the other to ground. The new...

Well I finaly got him to bring that nanza here to EAST TN CUSTOM MINIBIKES AND BAD ASS EVERYTHING . The all new raptor I have built him is going on the nanza . The motor has a dyno 107ss cam , billet rod and flywheel . Also the new dual bearing block has had the ports cleaned up and eyebrows...