stuck

I have an early 80s 30" cut rider mower that I have owned since 1998. I have had to rebuild the transmission (Forward, Neutral & Reverse only), The Transaxle, front end joints/replaced the axle assembly, made a seat ... well you get the idea .. I really like this little goober ... New...

I have been getting my rupp ready to paint & derusting parts. This is one of my first projects so been taking my time but i am stuck at the moment. 1) i can not get the fork off. The bolt/nut wont budge, even after spraying with pb blast every day for a while. i dont have any socket wrenches...

Today and everyday I am mentally planning my OX project a two wheel drive mini with 26 x 11 x 12 atv tires powered by a modified gx390 and it occurred to me that most off road bikes get stuck when going over a large object that contacts the frame and the wheels loose traction so I thought it...

Looking for some input .. is it worth fixing? It had a stuck open exhaust valve due to a stuck pushrod .. Possibly tied in with the breather being plugged with mud .. The piston is scored both front and back ... The cylinder is also scored up front and back .. I...

I was pulling apart the K&S I have and discovered the front end is sprung! I had no idea, everything was so painted up and stuck it just seemed solid. Anyway, one leg came out fine, but the other... well, the spring is stuck. Hard. It (the spring) has a weird bend where it's been compressed...

Hi need help took off my flywheel cover on my 3HP Briggs and now when I put it back on I can pull it's once then it's gets stuck ? what am I doing wrong ?

Im trying to take out the emulsion tube so i can add my stage 1 kit but it wont budge. I have a predator 212 "hemi". Its pretty new, if that means anything. I cant get the tube to fall out and dont want to break it trying to get it out. Any tips that are sure to work?

I recently picked up JC Pennys/ Bird mini with stuck forks. Can someone possibly tell me how to disassemble them and maybe the measurement outside to outside on the spring cups (unweighted)? I need to know if they are stuck compressed or extended. I'm looking for any and all advice:thumbsup...

I recently picked up JC Pennys/ Bird mini with stuck forks. Can someone possibly tell me how to disassemble them and maybe the measurement outside to outside on the spring cups (unweighted)? I need to know if they are stuck compressed or extended. I'm looking for any and all advice:thumbsup...

I have a 198cc briggs and straton motor and the pull start is stuck.

So long story short my chain is tapping the torque converter up on the part that attaches to the crankshaft and I need to move the torque converter out away from the motor a tiny bit more but the cog piece that sits on the crankshaft that drives the converter will not come off, any ideas...

I have this old comet 20 series driven unit that is 40 years old and I can not get the cam off..... I removed the 3 allen screws ( which should be like a retaining clip on new drivens ). Not sure if it is stuck from 40 years of corrosion or it was never meant to come off. What do you guys...

2 weeks ago I was heading up to the park to meet up with the wife and sitting out by the road was an old rotor tiller! I threw it in the back of the s u v and brought it home. Cleaned the varnish out of the carb and cleaned the plug! After about 10 pulls she fired up! The gear box for the tiller...

I found a Super Bronc in a shed. The guy is willing to sell but I want to offer him a fair price. It is complete but does need a lot of work. Tire are dry rotted and the cables are stuck. The old Tecumseh engine needs replaced. The front shock don't look good either. I would appreciate the...

Top 2 seats $20 ea Bottom 2 $25 ea Sebac shocks- $30 pair not stuck but could use new paint. 6" manco whee with Carlisle universal tread tire. Bolt stuck in one of the holes and rim of one bolt hole damaged check photos. Threaded holes on both sides for sprocket...

Super Taco!! I believe this to be a 1971 model. Excellent candidate for a restoration. Nice and straight, no broken welds . Still has the original Steens sticker on the top tube, and the serial number is legible (SC89). Someone slathered red housepaint all over it, those are the big chunks seen...

Does anyone have any good techniques for removing the snaps out of the female part of the snap? These things are really stuck every single one of them!! I'm practically destroying the first one i'm trying to get out with pliers.

Looking for one rear shock. Would like the chrome spring to be in ok-good condition. Not stuck. Let me know. Just need one to complete my parts list.

Anybody have any ideas on anything I can pour in the cylinder head to unfreeze a motor.

So I got this gorgeous Clinton as a free throw-in with some motors I bought last weekend. Its stuck but I've been looking for one lately to try out some techniques I read about in an article awhile back. Seems like an interesting winter project. I opened it yesterday and here are some...