stuck

Okay. So this was my first time installing a piston in anything and I messed up( I know practice makes perfect :D . So I had my 3.308 (standard size) rod on my stock predator 212cc piston (same with wrist pin but I have gx200 clips because I lost mine but they are the same size) and i gently put...

Have a rupp continental rear swingarm with the spindle frozen inside the swingarm tube. Have been soaking and heating with a propane torch but so far no go. Tried the following which did not work. 1) 20 ton press which almost stalls and I am afraid I may bend the while thing. 2)Screw in a...

This clutch was rusted on the crank and had to be filed off after the rest of the clutch was pulled off by a gear puller.

This clutch was rusted on the crank and had to be filed off after the rest of the clutch was pulled off by a gear puller.

This clutch was rusted on the crank and had to be filed off after the rest of the clutch was pulled off by a gear puller.

This clutch was rusted on the crank and had to be filed off after the rest of the clutch was pulled off by a gear puller.

This clutch was rusted on the crank and had to be filed off after the rest of the clutch was pulled off by a gear puller.

This clutch was rusted on the crank and had to be filed off after the rest of the clutch was pulled off by a gear puller.

This clutch was rusted on the crank and had to be filed off after the rest of the clutch was pulled off by a gear puller.

There is a non working clutch on my predator engine and it seems to be stuck on.. I can not get it off.. Any suggestions? Sent from my iPhone using Tapatal

I'm sure almost everyone here already knows about the wax trick but for the 2 or 3 that still don't here it is, I learned this from one of the old wise ones at work. When you got some bolts or even shafts or whatever that are tight and your heating them and trying all different things before...

Im on my way to the store to get something WD40 kroil or something in the meanwhile I poured some seafoam on it

Have about 100 miles on a Lifan (Z-Star) engine in a 73 SL-70. While out on a road trip was down shifting, coming to a stop. Bike went into neutral and will not shift out, up nor down. Big Rob and I switched the engine out today, thankfully I have lots of good help, but has anyone experienced...

I started this by asking a question but I figured it out so I'm changing it. My torque converter was stuck on and I tried all sorts of things to get it off. Here's what I figured out. Spray some PB blaster all around it and wait for a bit for it to soak in. Then I put a small washer inside...

Hey all I have a tecumseh 3hp that has the side cover stuck on. The crank turns freely. I took out everything else no problem but the damn cover won't come off. It's not a bearing crank so there's no nuts to undo there. I've got it about .25 - .50" open so I can barely see inside. I've tried...

Howdy. I need help with my predator. I was trying to move the gov linkage just a little to bump max RPM up just a little. Well in doing so, the linkage came off the gov arm. The gov doesn't appear to have any spring tension on it and neither does the carb throttle. However, when I connect...

Do any of you guys know a good safe way to remove a stuck crank case side cover on a 3hp FH Briggs? I am working on a motor for a lawn aerator, I have taken the gear reduction off, and all the bolts are out, I am trying to remove the sidecover, which appears to come off the same way as your...

I am trying to get a side cover off one of the Briggs I recently got. It will slide about 3/8 " and that's it. I can't see a snap ring in there but there is an indent or ding as seen in the pic, could that be where the problem is? [/IMG]

I went out and started all the mini bikes to get them ready for some riding time over the holiday. I found that my one h60 wouldn't idle even after cleaning the jet so that meant only one thing ---stuck check ball. I shook the carb and sure enough no rattle. I soaked it over night in gas...

Second time the pad froze to the disc. Anyone ever have this happen? Remedies? Thanks in advance!