tav

i have a couple different TAV jackshaft plates that have both a bottom motor plate as well as a side mount plate that bolts to the side cover. got them unattached but when i go to try and use them, if i line up the bottom plate the side plate is almost a half inch away. i have TAV plates...

Well I came to the realization that I am not going to use this TAV unit so it's time to let it go. I am calling it NOS since when I opened it up the packing inside the TAV cover was from 2004 so it is 10 years old. It is for 3/4" crank #35 chain 12 tooth drive. This one is old...

Has anyone used the China made tav from OldMiniBikes? Is it any good?

Anybody know where I can find torque specs for the bolt circles around the crank shaft? I will be mounting a TAV and wnat to snug it correctly.

What do you guys know about those cheap Torque converters on Ebay? I searched for TAV and they came up as replacements for the TAV units. The TAVs cost $100 more Obviously they are knock offs. Does anyone here have experience with them?

Ill bump this thread until I get an answer. I really need some help here (background, skip if ur lazy) Alright. I have had a TAV2 for quite some time now. Probably two years. Over them two years my engine has been getting more and more modifications, causing a hellof a lot more torque, HP, and...

Cleaning up /polishing the surfaces on this TAV 30 torque converter, these two minibikes sat in storage for a long time...little pitting but some fine emery cloth and steel wool is smoothing it out nicely

Sleeve loose on this torque converter, hope this holds

Greetings, After buying a used warrior on cl for the grand kids, internet searching brought me here. Lots of useful info and helpful people. Well the first modification everyone suggests is the tav. Mine came today so I installed it. All's I can say is wow. Very smooth and controllable and...

what is the difference between a torque a-verter and a torque converter? i did a search and found some topics about which one works best for whatever but none that stated exactly what the difference is. is there a diff? thanks.

Wife said she would like a 4 wheeler.I try to be a good husband,so I found one. it's a cheap 110cc but the stator is bad and needs to be rewired. To keep this more in the lines of the rest of the fleet of mini's I have the solution.... I'll get her input for paint.

its complete in good working order with belt bolth driver and driven are for 3/4 shaft shipping is 15.00 in the 48 states asking 125.00 obo , has surface rust on face of driver but does not effect how it functions

Murray Track2 with a TAV, header

Murray Track2 with a TAV

Murray Track2 with a TAV