washer

I see over Northern Tool they got an attachment lets you use a sand media with your PW, anyone tried one of these and had any luck??? I love that baking soda link who'd a thought??? but the same principle is use on a sand attachment on a PW, anybody use one yet???? thnks red423

Here is a 1967 Ruttman Washer frame . The forks are mint. It has the larger Triple tree forks. it has some goofy extras welded to it but can be cleaned up easy. Engine plate has some bigger slots. $195.00 plus shipping.

Could use an original Comet 330 driver outer washer, plate, and bolt. Let me know? Thanks loads Similar to these:

I thought I needed a parts washer , and the cheapest I could find was a bench top plastic one for $100 I decided I could to build my own for next to nothing I had an old stainless steel kitchen sink to start with and plywood to build a cabinet as well as my favorite sitting bucket lol I did...

hello OldMiniBikes My washer frame Rutttman 3.5 tecumseh is up for grabs I live In Lebanon IN. you will not find a nicer washer frame Ruttman $1500.00 sorry no trades

I have Powder-coated Ruttman washer frame roller or ready to ride with 6.5 clone : air filter kit jetted Kart motor header and pipe as a Roller asking$400.00 no engine Ready to ride asking $650.00 see pic below

Anyone know what size nut and what kind of washer I need.

Morning people,just recived my mikuni 22mm kit for my clone 6.5 and setting up the carb I noticed the needle on the slide has the metal clip and a little white plastic washer on it,does it need the washer on it as I don't think it should? Any advice thanks from the uk lee

So I scored a pressure washer with a cracked pump he forgot to turn the water on. It's horizontal shaft so will this work?

Ruttman chrome washer roller...all chrome on bike has been re-done. The bolts..frame..fenders..sprocket. It has the original seat, grips,and peg caps. It has the 5'' Ruttman/Taco wheels in very nice condition with the original tires in drivable condition. Sit down for this one...but before you...

This is not my bike but I looked at it tonight. Near Gladwin MI Ruttman washer frame, the bike is complete other than the inner throttle cable. It has had a scrub brake aded , custom clutch/chain guard, forks are bent but not too bad. I think the seat and wheels are original. 3 hp...

Kinda looks like it huh? Mini bike

Ruttman washer frame bike, the engine runs , I am not sure of the size around 3hp. Nice frame the kick stand has been welded on. 175.00 near Midland Michigan, free delivery to the Ann Arbor show.

I was hunting around on craigslist and I found a 9HP B&S pressure washer motor for 100 bucks. Will this motor work OK on a mini bike? I have never had any experiance with a pressure washer motor, just snowblowers and rototillers. Any tips? Thanks everyone!

Anyone know where this goes, and what it's for? It came in a Tecumseh carb rebuild kit. I didn't notice one on my carb when I rebuilt it. It's 1/4" in diameter, 1/16" thick, with a 1/16" hole. Is this for the main needle? I still have the leaking main needle problem, even with a new o-ring.

I have a honda gc160, i don't know if it has oil shut off switch if so where? But the motor does have oil in it but i heard they can be really sensitive. The engine will start and run fine with choke on then once warm whether choke is on or off the engine will start to run rich and spit black...

Super cool pick. Old washer frame. Poor kid don't even have shoes!

What components do you have to change to make a fixed throttle engine to a variable throttle?

Ruttman washer frame in vary nice condition. 100.00 OBO The bike is near Midland Michigan

I have a B&S 5HP I/C that was powering a pressure washer pump. Pump went bad early on. Today I removed the engine from the pressure washer cart & pulled the pump off. There is a piece that I will call a hub on the output shaft that needs to be removed. (See pic below) Anyone know how to...