5hp

So I just rebuilt my briggs and it smokes since oil gets into the top end. And when I say oil, I mean a lot of oil. My rings are good and properly spaced, also, the cylinder is good, valves lapped, guides good. The only thing I can think of is that I milled the head too far down, I think I went...

this seems like a silly question but here it goes... This summer I made a header for my 5hp briggs out of a flange i made, a coupler and a 12 inch length of water pipe. My question is do i need tyo run a muffler on the end of this pipe, or will i run the risk of sucking cold ari through...

My friend has a motorsport tech motor and I reccomend replacing the valve springs. Cause my experience with 3 of them is the valve springs breaks and drops the pysh rod into the crankcase and its done . Thanks for any help.

i recently pulled the motor from my mini for winter since i neddt to replace some parts, paint andfix my engine, not to mention clean the heck out ofit, alot of hard riding :thumbsup:. so heres the deal, it knocks, i mean the valves make a ka- clack sound when turning over by hand and when its...

well i took the side cover off of my 5hp briggs and stratton and i left the governor gear in withh it does the governor gear have to be a a certain angle because i dont want it blowing up on me

Selling our 5HP Briggs and Stratton flathead motor, model 130202 3207, $40 in Kyle, TX just south of Austin, I really do not want to ship it. I have more in new parts than I am asking, just replaced it with a 212cc Preddy, so looking to make room. The motor was on my son's go-kart, so it...

DB30 w/ following mods: pocket bike tires, OldMiniBikes sprocket adaptor w/ 65 tooth sprocket, ProMod engine adaptor plate, ProMod hydraulic brakes, Digatron Tach, Briggs 5hp FunPower Flathead stock engine, custom chain guard by ChasDaddy, runs good!!!

DB30 w/ following mods: pocket bike tires, OldMiniBikes sprocket adaptor w/ 65 tooth sprocket, ProMod engine adaptor plate, ProMod hydraulic brakes, Digatron Tach, Briggs 5hp FunPower Flathead stock engine, custom chain guard by ChasDaddy, runs good!!!

Interested in finding more out about this motor. I need an air filter and eventually a rebuild even though it runs strong right now, smokes a little. It's in my sears roper btw. The guy at my local lawnmower/scooter repair shop insists(OVER THE PHONE, HAS NOT SEEN MOTOR) that its a Tecumseh...

Ok, so heres the scoop, my friend dumpde my mini a wee or two ago, he dumpde it on the sied at a low speed but broke 2 flywheel fins off. so i removed the busted flywheel since it was so off balance, but i realized the coil (points style) has a crack on the plastic (the bottom by the flywheel...

This is a 70's Herters minibike. 5hp flathead Briggs, bushing motor. A few modifications, runs fantastic. Comet TAV-2 Torque Converter, less than 10 hours of actual run time. Super-clean, super fun. I posted these photos in the past and there was no love for the wheelie bar. I understand...

Hello all, i have a friend who makes off road lawnmowers and he told me that you can run lights off the points and condensr ignition coil. i still dont know exactly what he means and i cant ask him since hes away at college. so if theres anyone who has heard of this thanks. EDIT: i have a 5hp...

Looking for a Cool bore side cover (5hp)

I have a kart with a briggs on it and I just got it all tuned up, but when Im riding it and I punch it, it bogs out and I have to keep tapping the gas and put the choke back on and then I can feather the gas and it does fine. I just would like to know why it bogs when punched? I heard it could...

If anyone has a performance gas carb perferably with intake manifold for Briggs 5hp please let me know. I will be willing to pay shipping.:scooter::smile:

anybody got a pull starter/engine cover for a 5hp briggs?

my pull starter has been rebuilt too many times and the tabs fell off. If you have one in good condition and want to sell let me know, thanks.

were can i get a good gas gravity feed carb for 5hp briggs that will fit a 32mm air filter?