animal

I'm sure it's been done, in fact, I'm sure I've seen pics on OldMiniBikes of Rupps with Animal engines. I'm curious if anyone can tell me how they made a Briggs Animal fit on a '70 Rupp slanted frame. Tips and tricks? 'preciate it. furyus

Hi you doing. I'm new an I want to build a mini bike. I was looking a engines an I would like to know if I buy a briggs and stratton animal would I be able to get up to 50-60 mph. I my weight is 170 if that has anything to do with it. Thank You.

i have a 6.5 hp briggs intek ohv that i basicly turned into an animal, it has all animal internals, aluminum flywheel, the stock animal walbro carb, and the animal ballbearing sidecover. my question is when the motor is running at opperating temp, from no throttle to about 3/8th's throttle it...

anybody have a pipe or can you make one that will work on an Animal? I hate to buy one blindly online from a kart store without knowing if it will fit in my frame. This is for a Murray TR2 frame. I can take pictures of the engine mocked up in the frame with a measuring tape when/if I can find...

where can i get jets for my animal walbro slide carb? id like to just buy single ones cause the jet kits are a little pricey

flanges must be precision cut and accept 1 1/8" o.d pipe....

I'm posting this for sale for a local guy, so feel free to ask as many questions as you like. Valves are 1.250"/1.125", Comes with intake for 28mm mikuni, $350 shipped Roller rockers are separate, they are 1.25 ratio, $165 shipped

I need: 1- Billet Aluminum Stock Length Connecting rod with bearings 1- Billet (NON PVL Ignition) Billet Flywheel (fan not needed) 1- Tilly Intake The parts must be for a Briggs Animal. Let me see what you guys have.

so i have a 6.5 hp briggs intek with the following addons- -billet animal flywheel -animal walbro slide carb. -animal carb spacer -heavier duty animal valve springs and hardend retainers -animal ballbearing crankcase cover -very light porting -billet con rod now my question, if i got...

Anyone know if there is anything special about the Briggs Animal crankshaft over the stock one found in a Briggs Intek 206 series motor? I have a Briggs 121332-0036-E2 in need of a crankshaft. Looking for a low cost alternative to buying a brand new one. Any help would be appreciated.

So this site seems to be overrun by clone and Honda engines when it comes to high performance engines. Fact is, I've been a clone/honda guy myself thus far and I'm building a GX right now. I've never really seen anyone running an Animal in a mini bike, so I thought I'd post some pictures of my...

Ok, so at the LRU I was really quite impressed with the performance I observed from a stock Animal engine. That being said, I wanted to see if anyone out there perhaps has one sitting in a box new (yeah right) or one that has been sliiiiiiiiightly used. Spare me the links to buy them...

hi i was wondering about a brigs animal vs a clone with all the new parts. what would be the good points and the bad points of a animal? i see some for under $500.00 new. im not stepping on toes just a friendly topic to discuss.

how many hours can i put on one before i need to rebuild it. no mods.

K&N style. Bought the wrong one, better to try and sell it here. This is what it looks like and what I paid. Brand NEW just got it today and realized what I had done, dumass!!! Briggs Animal Air Filter Racing Barstool Go Kart New - eBay (item 370107042447 end time Mar-23-11 10:03:38 PDT) $20.00...

Has anyone used the Animal PZ22 carb on a 5hp Flathead? I was thinking of using this set-up. I am running a 07-3 Dyno cam with 1.420 springs at about 18 pounds of pressure. I am looking to run about 6500-6800 rpms. I run it on a mini bike so I was just wondering if anyone has used this carb and...

Has anyone crunched some numbers and compared building up a clone as opposed to buying the $500.00 animal that is out there? (ie: w/ the 206 option) Is the animal more engine out of the box than the purchase of a clone then adding the comparable parts? Here in Minnesota the best I have seen...

Briggs and Stratton shortblock

Has anybody put an animal carb on a flathead motor ? I have but it won't run worth %$@%@. any ideas will help. Can't get it to idel or rev. is a stock animal carb on gas and it came off of my dirt kart that ran very well this season. is it to rich or to lean??? HELP Jim

hey guys, im at my dads shop and im having trouble getting my animal started. right now it has a recoil start, but im getting an electric one soon, i cant pull past the compression stage. but so far after pulling for 14 minutes, it back fired twice, there was also gas coming out of the air...