frijole

Taco 2nd place ribbon

I have a pair of new Azusa handlebars that fit a frijole frame (shown installed in pic attached) and possibly other frames. These are more comfortable for riding than originals. $35 + ship from 49235.

Everything new....sprocket, rims, seat, scrub brake, tires. Motor mount plate and foot pegs need to be welded on the frame. Engine not included. $400 + ship from 49235

This is a Tecumseh HSK 850 5 hp, 2 cycle snowblower engine. I'm installing it in my Monster Frijole just to be different. The crank has a 1" end on it-so I put on an 18t #35 sprocket going to a jackshaft. Tilting the whole thing 45 degrees makes it fit better in this frame without changing the...

This is a Tecumseh HSK 850 2 cycle 5 hp snowblower engine. It runs like a champ.It's going into the Frijole-if not,then it will propel the Grand Prix. The Frijole already has jackshaft mounts on the frame-the GP will need them welded on. The engine has a long 1" crank end-I have an 18t sprocket...

Taco Frijole Monster

Taco Frijole Monster

Taco Frijole Monster

Taco Frijole Monster

Taco Frijole Monster

I am planning to use a Tecumseh HSK 600 (3 HP) or an HSK 850 (4.5 hp) 2-cycle engine on a build. I just want something different.... 1) Will the stock carb work on either engine? I can fabricate a throttle,if necessary. 2) If I changed the carb on either engine,what would be the best to...

Last of the TacoMoto Frijoles.I had Kent Carlson custom build this one to my specs.I added my own motor mount,and shortened up the forks another 1-1/4".............. Thick 1/8" wall tubing,both frame and forks. I also added jackshaft brackets and complete jackshaft with alloy plates,sprockets...

this is a nice frijole series 1 frame i got on evillbay a few months ago...from a guy in calif.rumor has it that it could be a copy(see my other posts)but i find most steens/taco mini bikes to be under some sort of scrutiny anyway... i have put up lots of photos,you decide rather you like it or...

Monster Taco Frijole

Monster Taco Frijole

Monster Taco Frijole

Monster Taco Frijole

Here is the latest phase of my Monster Frijole. It has a 79cc Greyhound with a race carb from AGK,an open header,and a homemade hoopty air cleaner made from a spray bomb lid. I solved the fuel tank problem by simply using a motorized bicycle tank,which was under $40.00 in chrome. Obviously you...

Last of the TacoMoto rollers.I had Mr. Carlson custom build this one to my specs.I added my own motor mount,and shortened up the forks another 1-1/4".............. Thick 1/8" wall tubing,both frame and forks. I also added jackshaft brackets and complete jackshaft with alloy plates,sprockets and...