h35

I need a shroud for my rupp build. The one I have is cracked along the front edge where it overlaps the head. I have an ID plate that I'm going to transfer over, so it doesn't need to have it. It does need to be a round-shroud design (1970). I think the H35 shrouds would work as well. I'd prefer...

I'm building a Tec. H35 side popper, and was wondering what kind of exhaust most of the mini's came out with back in the day. Anyone have any Pics ? Was it like this exhaust in my pic ?

I just picked up a "Magic Rider" mini bike. It has an A inside what appears to be the outline of the lower 48. It has the original Tecumseh H35, Id H35 45355 H Seriel 11838, not asking for engine ID here as I posted it in the Engine section, just thought that would help with the year. I cant...

I just removed the intake and noticed how small the ID of that was compared to the carb. This pic is of the carb and intake from a H35 but the piece all the way to the left is the end of a pulsa jet carb I cut off. I need to mount this carb to an old Briggs 3hp engine. I can't bolt the h35...

i was puttering the afternoon away with an H35 block and an ARC6282 billet connecting rod, the billet rod fits the H35. Slick! it will need some fitting so it passes the cam, the oil dipper will need a hair cut too. this rod is the one for the 5.5hp tecumseh OHV, it also fits the HS50...

nice units, I can't get the pictures to load. toss me a pee em with your email and I will send. $40 shipped to U.s. 48 states. Carb is float bowl type and may need a cleaning or rebuild. Tank is black plastic with center fill.

1969 Tecumseh H35. Carb and white air filter. Bought this for a build and didn't use it. Has spark and compression. Member I bought it from said it was running. Would be a great engine for a vintage build. $130 shipped

Found these two huddling together in a dark corner of a shed yesterday. Silver H35 ARCO engine. H35-45319H. Clutch still on. Its a 1970. Would this be the correct colors for a Tec on an ARCO bike? Could just be the recoil I suppose. And the other is an Ariens snow blower HS40. Also...

Hey all, I just picked up a runner H35. I have rebuilt Briggs before but have not been able to do a Tecmseh. :thumbsup: the first digit of the year is a 4, does it mean that is is either a 64 or a 74? :confused: The coil is under the flywheel on this engine. Is that the one you can run...

Anyone have a Tec H35 side cover that has a bearing? pm me.

I have a Arco Colt for sale. Comes with 1970 H35 Tecumseh motor. This colt is a nice mini. Original decal with serial number in really good condition. Original paint with some over spray of a different blue in a couple of spots. Might clean off. Has original throttle and grips, brake caliper...

I have a nice rebuild Tecumseh h35 here. It was rebuilt before I purchased it. The carburetor was also new. The paint job wasn't that nice. It has faded. It has a new spark arrester. The plastic tank was also NOS. It runs great. Price: $160.00 plus Shipping

Alright, so I need some help and advice. Working on the 1970 Tecumseh H35 that came on my Rupp sprint. Replaced all the gaskets, cleaned it all up, for the life of me I couldn't get the diaphragm carb to work properly so for the time being I swapped on a float carb from a late 80s Tecumseh...

Tecumseh H35 flywheel. Part number 31332. May fit other models as well. $35 shipped - lower 48 states only. Located near Detroit, MI 48088. Discount given if you can pick up and pay cash.

Hard to find Tecumseh "Mini-Bike" specific throttle. These were reproduced by OldMiniBikes memeber Joe51 a couple years ago. This is the small block version which I believe fits all H25, H30, H35, HS40 and HS50 engines. The attention to detail on these is superb. These were manufactured exactly the...

I read the Tec manual, but it only gives a single digit for the year. So I guess I got to consult Johnny Carson's the Great Carnac to figure out which decade??? (in the year 2525 maybe). So here is the Goobertron digits: H35 45408J 4156b, so how do I tell if this is a 60's, 70's or 80's model...

Hey guys, I just picked up my first bike yesterday for $80! And I've really started into it. I think its a Cat 300x, what do you guy think? Its a little rough but I'm going to give it a good paint job and fix it up. It has a Tecumseh H35 that runs right now. Anyone confirm what I've figured...

On the block is a Sears model Super Two-Speed. However, it's missing the jack shaft set up for the two speed portion and is using a chain directly from the motor to the drive sprocket. Other than that, it's in great shape! I believe the paint to be original, although with some scratches. The...

I want to buy a restored 1970 - 1972 vintage Tecumseh H35 engine to restore my minibike from that era. Would prefer it to be restored to factory original condition, but I will also consider era-correct engines in need of rebuilding. My engine was similar to the attached photo. Thanks. Waid

I'm up to 35 bucks to start em now.. :laugh: Fck it.. These things are getting hard to come by... And the new replacement bastards don't even come as a carb you can use.. BUILD your own carb from a 80 dollar chinese replacement AND your old carb??? :blink: ?? HOPEFULLY you can build carbs AND...