location

Is there a tank that has the fill location on the right hand side instead of the center? The way it is now is a pain in the a?? to fill. I dont see any on ebay... any help would be great....thanks

Vote on the Poll. Lets see the popularity... :shrug:

Has anyone ever relocated the spark plug to a more centered location in the head? I have seen on other model B/S the plugs are in different locations in the head.

I know this could/should probably be in the off-topic section...but I wanted it to get more attention. I've been a member here for a long time, and a supporting member for a long time. I love this site. However, it's a real pain in the arse to actually find the area to re-up your supporting...

On my vintage bike the rear sprocket set-up was" " the sprocket weld onto the rear brake drum. The sprocket was worn out, so cut it off the drum carefully, now need to decide if I should buy another sprocket and machine hole to fit over the drum and weld again? Or swap the brakes to the other...

Can somebody get me the exact measurements of the t-nut locations for a Toyoco? Close only counts in horse shoes and hangranades.:laugh: Trying to finish up a seat. Thank you.

hey, I want to get the strut mount catch can, but I didn't want to install it in the back by the tire... where else can I mount it? I was thinking maybe in front of the engine, or where the rear fender mounts in front of the tire

I've been working on finding a hassle free spot to tune/ride some of the things my sons and I have been working on and a few people from this board have asked me if there's any good places around here since Suburbia has sprawled almost everywhere here. Almost everything is off limits unless you...

Im curious to know where everyones from??? Ive seen minis go far and wide but where are the active members from?? Anyone near northwest PA? Or Northeast Ohio?? How Bout Northwestern new york?? Fav places to ride? Please share!!

hey everyone.. has anyone put a pluse fuel pump on a briggs and stratton 3.5 hp? what location would be best to install into the motor at? could i just use the breather assembly some one with this pump or go ahead and tap into the case somewhere? and if i do what location would be a good...

I live in Hamilton, Ontario, Canada and I'm very frustrated that most eBay sellers or venders don't ship their engines to Canada. Does anyone know of somewhere in Canada I can order a Pred from?:scooter:

I am restoring a hustler and have a sticker set, but which sticker goes on the air filter housing and which one goes on the rear tube immediately behind the engine? I have two that make mention of not running this with the guard removed (one of which I know goes on the chaing guard). I have...

Hey Guys, I have a freshly painted 5HP Tecumseh engine and some reproduction decals and was wondering where they placed them. Does anyone have a picture? I know where the main 5HP decal goes, but I have a smaller engine lubrication decal I don't know where to place. Can anyone help me out...

I have found an engine serial # but is there a number on the frame of a '73 HD X90? Thanks

I don't want to come across as a sniveling whine asz, but would you guys please change your location descriptions in your avatars to something a non geography major or master geocacher can understand? You guys know who you are! Some that come to mind are similar to these...

Looking for a picture that shows how the coil is mounted to a early 1300 Bonanza hodaka (gas tank under the seat). From what I can tell it is mounted somewhere on the motor on the riders left side. Any help or link would be appreciated.

Anyone have a picture of the location of this screw. I've looked all over the Carburetor and didn't see one.

Does anybody know about any swap meets or other events in NC? In or around Winston Salem, Greensboro, Thomasville, Lexington, Salisbury, or Ashboro? :)

Well Im being told we had a turn out of 16 mini's today. It was fun for sure. Thanks for letting us join in on the fun today guys.. Here is a couple videos. Will have better ones in a day of two. These are from my phone. Laton, Lemoore, Hanford, and Fresno guys running minibikes. Maybe next...

whats the deal, ive noticed on alot of threads that it seems like people fail to add there location to where there from. why is that ? r they scared of people knowing where there from for some sort of reason ?whats the big deal ? id like to know where these people r comin from ? cuz...