problems

I have a H35 that runs great for about 3 or 4 minutes...then dies. I can crank it and it idles great and runs great down the road, but when I let off the gas to turn around it dies and is very hard to get cranked again. It just seems like it won't run once it gets hot. Any ideas?? Oh, by the...

Hi fellas, so I am working on an st90 for a friend. It had a no sprak issue for a while but i resolved that finally. Bike will fire up and run fairly easily when I have the choke on but she will die as soon as I slowly back the choke off. Also, the bike will not idle to save its life. So before...

I'm thinking of starting a "I hate drum brakes" support group. Is it just me or are they a pain in the ass to get them to actually work without a gorilla strength grip? I'm talking about the very common 4" stamped zinc plated style that fits Manco wheels. I have an Arctic Cat with 6" Manco...

Ordered a new 6" hub and wheel assembly from mfg supply a week or two ago. This one: 8-376 - 6" Rear Demountable Wheel Assembly | Go Kart & Mini Bike Parts | MFG Supply Got the wheel painted, mounted to the hub, on the bike etc. Noticed the wheel runs perfectly true, no slop in the bearings...

I have had this truck for about 4 weeks now. Put almost 1000 miles. I really love the truck but there is something wrong with the stearing. I took it back to the dealer and they did a front end alignment. They said it was off .25. The stearing is still not right. Went back to the dealer on...

so im fixing a snow blower and it has spark and everything but it wont start, the carb is spraying out gas but the engine isn't getting any of it I guess

I have a Baja Heat 196cc (bought it used) it ran fine for the first week or so (actually it still runs) but 2 things have happened since. 1. We are experiencing some violent whip back when trying to pull start, rips the cord out of your hand (almost rips your fingers off) what causes this...

Hey guys I'm looking for a little help. I recently bought a mini Indian with an intaljet engine on it. It starts fine and stays running for a minute then dies. Anybody have any suggestions

This is a used 212 cc motor it runs fine, when i first got it it was super torque monster, pulled from wheel on sears roper to easy, now its not like that anymore, and also it shutters, skips at high rpms, is that the governor, it just jumps like crazy, would the problem with the torque be...

The ARC adjustable billet flywheel I bought for my 5hp Briggs I/C is hitting on the block where the mounts for points are. This motor doesn't use points but the mounts were still casted on the block. Here's the pictures so you know what I mean. I imagine I could cut those off and the...

Hey guys I have a tilly 334 ab that I'm having trouble mounting on my flathead. The throttle linkage hits the exhaust. Any suggestions?

Hello, I have a doodle bug that I recently converted to 40 chain to handle my aggressive riding in unknown terrain and high speeds with a weight of 135 pounds. The stock 35 chain would stretch way to fast, and if it got grass in the chain n sprockets it would jump off or snap (not a the...

Is there any things I should be looking at to make these bikes more reliable.

Here ya go !!! MSD Powersports 41510 Small Engine Ignition Kit Alky Briggs Stratton Tecumseh | eBay

My brother wired the lights and made up battery cables and fixed a broken wire going to the alternator . When we put power to it saw a little smoke from the mag area after that motor will not run has no spark . So pull flywheel to check points they looked fine , had a old condensor that is good...

so i finally got the engine rigged up on the doodlebug frame i have, and yesterday i replaced the old fuel line with a really thick fuel line i found on an old engine. now, when i start it, first of all it is pulling itself forward ( im guessing the idle is too high, but i dont know what screw...

Ok guy's here we go. I had the local small engine guy rebuild an old 5hp briggs for me. I brought it home and started pulling on it trying to start it. It fired up for about 1.5 seconds. then it started trying to rip my arm off. I proceeded to check the oil and it was dry. I seriously doubt that...

ive got a 6.5 hp engine and the primer bulb is rotted. it looks like it is a pressed in unit. can it be replaced or do i need a new carb? can it just get pluged off and make a choke for it?

hi all Been lurking around here for a while. Just finished a project speedway with a predator has a max torque clutch to the jack shaft then to the rear wheel. Question is clutch heats up fast and throws sparks also has no torque to pull off pavement. 13t to 13t #35 chain off clutch to a #...

The engine starts with starting fluid runs for a sec then shuts off. Could it be the weather. I live in michigan we got snow and its around 17 degrees out side?