Confirmed early Cat throttle set (Derek) . Fits 7/8" bars. Plastic housing and tube, comes with Hunt Wilde ribbed grips. Five available.
NEW OLD STOCK!!!!
$30 bucks shipped, pay pal only please.
I have a few questions regarding connecting throttle cable.
There appears to be two locations where cable can be connected.
One is at the side of motor and moves up/down vertically.
Or it looks like it can be connected on the bottom part horizontally
Which location should be used...
Looks like I'm going to have to shorten a throttle cable I'm getting from OldMiniBikes. Anybody have any insight on what problems might encountered? I've never had to cut one of these, so I'm wondering about how to handle replacing that crimped metal "button" on the carburetor end. Any help would be...
Hello:
Looking for advice on where to get a throttle cable adjuster (with the jam nut) to fit the OldMiniBikes R261 cable that I want to order. Going to be using it with my NOS Odeon twist grip. Don't really see the adjuster I want on the Warehouse site. I'm a little unsure of the size as I don't...
Confirmed early cat throttle (Derek) from a 1969 400x. Good condition, grip isn't original. Cable included but not sure if it's original or not.
$75 plus shipping
Fellow Tote Goaters and others,
I'm looking for a solution to replace the stock twist throttle on a Tote Goat. I thought it would be a simple project, but what I'm running into is that the handlebar is 3/4 inch and NO ONE seems to offer a twist throttle replacement kit in anything smaller...
I bought some 1" Harley throttles and tried to used a 1" mini bike throttle Housing my and it didn't quite work. I bought just the Harley housing for a dual cable and the throttle feril different. I need a 5/16-18 for it. Anyone experience this same issue or know where I can get one.
Got it with the intention of using it but I'm downsizing and this engine will not be used. Has a scratch on the air cleaner cover but otherwise shiny new. I got a powersport throttle for it and it came with an NOS Taylor curved muffler with directional tail pipe. PM me for pics or I'll post em...
My throttle works but is pitted all up. I've searched around and it seems 1 inch stuff is pretty limited. I really don't want to chop off and weld on 7/8th so does anybody have any suggestions? I'm on a limited budget so an exotic billet roller bearings throttle is out of the question (tho I...
I found a video a month ago and i cant seem to find it. I think they drilled a hole in the throttle arm and hooked up the cable there. Can anyone post the video or have some pics of what they have done on a 79cc predator
If there is enough interest...I will be starting on Reproduction Trailhorse Throttle and Dumby grip this Winter.....
Black and white ones...
Anybody have any need for these?
I got the motor all cleaned up repainted, removed carbon build, grinded out a key way for the clutch, threaded the shaft to drop in a bolt but now I'm a bit stuck.
I have no clue how to properly set the throttle or if I need all the linages and spring that are on there already any help would...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.