bigger

After spending a week on a Tecumseh 4 horse I decided to steel the motor off the boys go-cart and mounted it on the Mini Gote. Everything works great but I would like to install a larger tank on this motor, Model 80202: It only had about a half hour run time with this little tank and...

Hello I'm looking for a running 13 hp engine or something bigger for my Ruppster. I am replacing my non running jlo rockwell 230 engine until I get it working. The new engine must have a 1 inch shaft with key fit to fit my commit duster clutch. I'm located in Southern California Orange County...

So I put ATV tires on my son's Yerf-dog and the front still sits much lower than the rear and I'm afraid it will high center way too easily. I'd like to put 7 or 8" wheels and tires on the front instead of the stock 6's but much higher and wider will rub on the frame in a tight turn. Will these...

Anyone who has a unwanted clutch that they would give away for free. 13 or bigger tooth thanks for you help

i believe i have a cat 250 frame and was wanting to put a 66 tooth sprocket on the back. has anyone put a bigger sprocket on a cat frame without having to cut the frame to make room for the chain?

The heat has been so bad I can't get any painting done. And Columbia Coatings. Won't send me any powder. Becaues of the heat. So here's what Im doing to keep up with my OldMiniBikes diet plan. Inspired by Delray's thread on his Baja...

I want to get a actual motorcycle for the road, but am completely inexperienced in this field. I was wondering if anybody has some tips on what kind of motorcycle to get for a beginner rider. I heard a 250 kawasaki Ninja is a good starter bike, also priced in my range. Also what to look for...

im looking for a 13 hp or bigger motor for my wildcat...pred,greyhounds hondas briggs w.e lmk

Says El Burro. But that may be a nickname... Any thoughts?

I recently put a new Harbor Freight 6.5 engine on my Baja Doodlebug and it is amazing!! Problem? I live on a dirt road and the rear wheel bogs down into the sand. I was wondering if it would be possible to put new and bigger tires on the bike instead of the regular 145/70-6 tires that are on...

hey guys. I was wondering if theres a bigger carb that can bolt up to a stock h35 manifold. I currently have the stock h35 carb on my 5hp briggs and don't get me wrong it runs nice, I just wonder if there's something better out there?

Im looking to get a little more ground clearance with my db, my first thought was bigger wheels just wanted to see what you guys have done and what wheels or other mods would work best Thanks in advance

So i have the governor removed and a custom header with a k&n filter. Do i need to rejet?

is there anything bigger then the 6.5 hp clones that fit the doodlebug

Hey, I have a 6.5 HF engine on my Kart rite now. My kart is fast with this motor and i have removed the governor thats about the only thing i did to it. I am wondering should I buy a bigger motor to get more speed and power or should i modify it? If i should get a bigger motor what kind of motor...

Well I finally got to ride the big yellow beast (Terra Cat ) :thumbsup: I had to fiddle with the carb a little but after that she ran like a top.Then I got the Cheetah all done and took it for a ride too, Wow that bike is fun !!! So I thought I might as well get the others out too . My...

I'd like to find an older larger mini bike for myself to ride, but I'm pondering as well building a new one. I'm considering buying a new model DB30, because that what is available new in the stores here now. Thing is they are so small for me. Having said that, I'm thinking of getting a new DB...

After trying 3 sets of shocks I still haven't found any that I'm 100% happy with. I've tried a set off of a Honda 50 (too soft), a pair off of a buddy's go kart (too stiff), and some progressive rate scooter shocks (too stiff). So I was wondering what shocks are you guys using on your bigger...

for #40/41 chain to fit baja warrior hub (4 bolts). seems to be a 3 1/8" bolt circle (center to center). and bigger then 1 1/4" center bore. 5/16" or 3/8" bolt holes. thx, rick

And it's not old, but I think this is a cool looking bike. Pit bikes and pocket bikes usually don't flip my switch, but I like this one.