carburetor

Hey Should i buy the original gasket or can i just use liquid gasket?? It's for HS50

I have a new Black Max 3000 Watt generator with a Honda GC 190 engine. Everytime i till it on its wheels to move it leaks gas from the carburetor.I have been given the the run around by both Black Max and Honda, I can take it back to Sam's Club and exchange it , but have the feeling the new one...

I noticed while tuning my engine gas is leaking from the fuel bowl were it seals to the carb the carb is brand new any thing to fix it? Probably something stupid but my head ain't working right:doah:

I was recently attempting to disassemble the carburetor petcock to repair it,as it was leaking. I was having trouble getting the darn thing apart, because the screws holding the petcock together were stripped out. So I took a dremel with a cutoff wheel and carefully cut slots into each screw for...

Is it possible to bypass the external fuel pump I currently have hooked up and run fuel directly into the carb inlet without using the "pulse line" inlet with the tank is positioned above the carb. {gravity fed}? If it is, do I just plug that inlet? Thanks!

Looking for a HL380B carb. Thanks!!

Where to get one... Anyone? Thanks...

Hi there, I am looking for a Briggs Raptor carb, or a bored out pulsa-jet that I can use on my modded 5hp FH Briggs. I am looking for a gas carb not one for alky. Let me know if you have something, thanks. :thumbsup:

Hello, I just bought a doodle with a 5hp powersport for 325$. Not much is wrong except for the carb leaking. It runs and everything but it leaks when it's not running. Anybody have an idea of what the problem is?:shrug:

Anybody make improvements to their carbs. I always mess with the Tecumseh carbs because there's always room for improvement. What kind of mods do you do and why?

I was wondering if there is a carburetor that has a 1" (or close) throttle bore and Hi & Low mixture needles. I'm talking about a carburetor from an HM80 or HM100, but made from Oregon or Rotary. If you know the part numbers, that would help. Thanks.

Well my question is about my 6.5HP motor not wanting to stay started after turning the choke off. Just notice this today, and didn't have much time to mess with it atm. But I do know I removed the governor plastic gear from inside the motor when I first got it, which has been probably two years...

Hi new guy here. I have a 73 harley x-90 and I need a carb to start the restore and to start it up. I am finding that they are hard to locate. Does anyone have one or a good source to look? I would also like to know if there is a replacement or alt. for that carb.? Would a sprint 250 carb...

Looking for angled carburetor/intake manifold for two Briggs & Stratten engines. One is a very healthy 2HP flathead with the carburetor that has a built in gas tank and the other is a 6HP OHV with the bowl-style carburetor. Both engines are being used on frames that have tilted engine mounts.

I'm working on the carburetor for a 4hp engine. The carburetor has a check ball in the main nozzle. The ball keeps sticking. I get it free so you can hear it rattle when you shake the carb. The engine runs and when I shut it off the ball is stuck again and it won't start. Pull the carburetor...

I was wondering if Anyone can tell Me what Replacement Carburetor and Part Number I. need on my Tecumseh HM80 155149C. My Original Carburetor Is Worn out and needs replaced. Also does Anyone Know where to purchase all the Govenor Linkage for this Carb.I need the Rods,Arm coming off of the Engine...

I have an intek 206 and am in need of an aftermarket carb. The stock one just isn't cutting it anymore. The real reason I want a new carb is there is no adjustment to it and it's running really lean I've cleaned it and decided I needed a new one. Then I thought why replace when I can upgrade...

I need a replacement carburetor for a 1979 Honda Z50R. I have found one on EBAY very reasonably priced but for a Honda Z50. Do the Z50s and Z50Rs used the same basic carburetor? Carburetor Honda SS50 Z50 Z50A K2 Carb | eBay Online manual help.......................pretty...

For sale a new little import round slide SHENG WEY Carb with choke. Two bolt flange mount, bore measures 20 MM Price $22.00 firm plus USPS shipping Steve :scooter:

I have a 3hp briggs with a pulsa-jet carb. I bought it not running, and after removing carb, cleaning it, sealing diaphragm with gasket sealer, it runs. But, its very hard to start, sometimes it will idle good, sometimes it won't idle at all. When i give it throttle, it dies. This doesn't happen...