gasket

I have a 6hp ohv power sport it runs perfect at high speeds but when ipush the gas hard the head sprays oil all over the whole back section but only at higher rpms is it the head gasket my engine has small mods and runs faster than stock please help me

I have a '72 Arctic Cat Whisker with a Sachs 47cc and I'm pricing around for a piston and gasket set.

I have a clone which is leaking oil. I don't want to buy a new gasket so I got gasket paper ad I am making one myself. Has anyone tried this before?

Model H30 35176H Tecumseh really need the parts

I need a new carb and head gasket for my tecumseh model H30 35176H

Anyone know where I can get a new carb and a new head gasket its a model h30 35176H?

went to a comercial gasket supplier they make them up ,take the carb with you .they have rolls that diameter they cut with a razor blade and glue with super glue ,the guy even gave me 2 ft to make my own at home ,he charged me 2 bucks . installed works like a charm

Anyone have luck making their own gaskets using gasket paper. I am sick of ordering gaskets from a local dealer, waiting and sometimes not ending up with the right gasket. I see no reason why I cant get some gasket paper and make an intake manifold gasket. I am sure the gasket paper would...

I cant find a local shop around for a gx 200 headgasket, so I temp made one with the cut out material coated with permatex 300, and bolted it increased compression where I broke the pull starter rope trying to start it. Would it be OK IF I try running with this type of compression with a...

I know most honda and clone engine parts are interchangeable My 5.5 dong jiang seems to be a gx160 knock off Want to know if anyone knows for a fact this gasket will fit before I order it Thanks in advance

Hi, can a sheet of copper at local hobby shop be used to make a head gasket for a 5.5? If it can, would engine respond different?

The part number in the manual is incorrect. When i ordered the gasket from the manual I ended up receiving the gasket for the honda side cover and the clone 66015 side cover is much different. When replacing the 66015 engine side cover gasket it's the gasket from the 96549 engine part #10348...

I'm fairly new to the whole engine restoration thing. Just wondering what peoples thoughts were on gasket sealant stuff such as Hylomar universal blue. Should it (or something similar) be used all the time, or only when a metal/paper/etc gasket isnt used? Can it be used just on its own? Rich

A few days ago I landed on a website that sells race parts for the Briggs 5hp and one of the items I was interested in was head gaskets. This site had copper and aluminum all the way down to .020. I didn't save the link and now I can't find it. Anyone know who sells thinner head gaskets ? I'd...

I have 15 Briggs #27670 that fit most 2-3.5 H.P engines. $3.75 each including shipping to your door. 1st class! ...0R... Buy all 15 for $23.07! Including Shipping Parcel Post. Randy:scooter: Mechanicsburg, Pa

Well , I have searched the forum,and Im still not sure what thickness of headgasket to use on my clone. I just purchased the flattop piston with new stock rings I hope them will work with that.Im not getting any head work done , just got the new stainless valves (lapped) - alum. retainers - 26pd...

Where exactly is the head gasket located ? Is it at the top most section of the engine ( 4 bolts hold it down ) or is it lower where it tapers into the carb area ? I don't recal seeing a gasket when I removed the top most portion to inspect the cylinder head ... this may be my low compression...