We have a MB80 with a noisy clutch kind of a scratchy sound. Our MB11 is quiet while idling. The MB80 has done it since new. I have taken it apart and cleaned & lubed it. Didn't make a difference. I was thinking of replacing the clutch. Would the modified clutch make a difference over...
I picked this old mini bike up today from this guy that had it as a kid in 1976. His dad had it in a shed since then and gave back to him. Well he don't want it I do! The Tec Motor looks old. Here's a few pics
Have finally given up trying to get an old 7HP tecumseh motor for a VT-7. What should I be looking at for a replacement?
Current set up is for a key start with headlight and tail light.
I have attached a photo of the bike before I took it apart.
I would be interested in tossing a 7hp...
I have a stepper motor with a 18 mm shaft and a 6mm keyway cut into the shaft.
I want to mount a sprocket on the motor shaft that can use a bicycle chain. The chain my bicycle sprocket will use is 1/2" pitch by 1/8" width. I believe this chain is also known as ANSI 43.
My problem is that so...
Looking for a complete Tecumseh HS40 with lighting. Running or rebuildable (no cracks, burned valve seats, etc.). I am willing to pay millions for it! :smile:
Hello i have a Honda Clone motor. it is stamped with a diamond and JD inside the diamond. the number on the block is 04s120601 and then it says JIANDONG. I got this motor on my trail horse when i bought it and was pretty beat up motor you could tell it was left out to rot for many years. if you...
Very good condition Lauson engine. Selling for a buddy. Look at pics for descriptions. Been sitting on a shelf its whole life. Asking $200 plus shipping
Heavy duty Never ran new motor. Missing cap - cannot locate it. $200 firm + ship from 49279
Info: The GS190 offers the best of two worlds. Higher durability, with features like a cast iron cylinder liner and three-piece oil control. And the benefits of a lightweight, compact, quiet OHC...
Hello All.
I need help. I am still new to mini bikes so...
I am working on a cat200x with a big motor on it. when I just crack the throttle to engage the clutch, it pops an aggressive wheelie! what can I do to stop this from happening?
my setup: Stock cat 250x, Honda gx200 motor and a...
Got an IC 5up brigs....needs cleaned
Had Alky in the crank case old on top the piston so it's lubed up pretty good, An dirty as well
What's a great way to clean The block / head / internals?
I Bought an Abrasive blast gun, but havnt been able to get the gun to blast yet
any...
I've been lurking around here a lot in the last few months. I've learned tons while putting together this predator 212 that I am using on a duck hunting boat. What I thought was going to be the last part of the puzzle is driving me insane...the mikuni 22mm knock off.
mods on the motor are...
I just have a few questions...recently bought a 5Hp Alky Brigs ....guy said the head was milled 10 over and had a racing cam inside...runs on Juice it has been sitting for a long time guy said it's brand new.....But my questions are whats the Power range of a 5hp alcohal motor?
And also...
So I recently Had the Motovox Minibike Running & The Engine Stopped Running After Some Serious Riding.
Friend Gave me a replacement:bowdown:.....((My First Honda)):drool:. Thanks Big Perm!:punk:
https://photos.google.com/photo/AF1QipNCjXbxfc8mHmkDpiw0bZFZ7TUjFFTx-W7HHw6s
So I just bought a 68 Briggs, supposedly 5hp. The model number is 100202 0015-01 6809107. Bought it for $35 dollars and it runs, but is missing a few things. The other motor I didn't buy I got for free . It is a 63 model number is 100202 40117 6305291 that is a 4hp. By looking at the motors I...
I got this project in with another purchase so it needs to go as I am out of room. Nice straight frame that was powder coated with running Tecumseh 5hp? motor with a clutch as well. The front forks work too. Needs a chain and motor bolted down as well as throttle hooked up. There is a separate...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.