predator

...BRIGGS AND PREDATORS AND TECUMSEH....

...BRIGGS AND PREDATORS AND TECUMSEH....

...BRIGGS AND PREDATORS AND TECUMSEH....

...BRIGGS AND PREDATORS AND TECUMSEH....

...BRIGGS AND PREDATORS AND TECUMSEH....

Was running great on 4th of July week. Parked it for a few weeks, then last weekend it only stayed idling with choke on. If I hit throttle with choke off it ran, but only at high speed close to WOT. I made no adjustments after it was parked. Any ideas?

Hey guys- Working on building up a Predator 212 to go into my DB30 for running around the property. Gonna be throwing a converter on it, instead of a clutch. I'm not looking for top end speed like I think most are. I'd like to have the most torque I can get. Where would you guys...

Which one of these wires do I come off of/cut/splice to get a kill switch up on the handle bars? Thank you for any help.

Can someone point out the difference between the Predator Hemi vs. the non-Hemi engine? I'm planning to purchase a 212cc Predator, but would like to know if there's a benefit to one engine over the other. Does the "Hemi" have a hemispherical combustion chamber design similar to a Mopar hemi...

That right, FREE to good home, I got this in a package deal with a comet, this motor has suppositley never been ran, the governor was removed but the correct mods were never completed, have all part to put it back on. Moving and need to make some room, first come first serve, can't hold or ship...

What size shaft do the harbor freight 79cc engines have? Looking for clutch options for my nephews bike

I have several performance parts for a 212cc predator and would like to know what all the differences are between the 212cc and the 196cc Predator engines. I can buy a 196cc real cheep and would like to know if a flat top piston, non hemi cam, ratio rockers, 26# valve springs, retainers &...

My engine is running rich I have a140 emulsion tube and a 36 jet in the carburetor. I have not really ran the engine it only has 2.8 hours. Most of this time is at idle for break-in period is that why it seems to be running rich and it will cure that issue when ran at more RPMs. I also have high...

photos showing clearance between cap and bar, and temporary replacement low profile cap

photos showing clearance between cap and bar, and temporary replacement low profile cap

photos showing clearance between cap and bar, and temporary replacement low profile cap

Hey guys bought a fresh predator motor and first thing I pulled the govenor and guts out, put an ARC Flywheel on, Higher tension Valve springs, and an air filter and jet kit. But I did not touch anything else. Now I went to break it in the other night and oiled it, and as soon as it hits...

I have done a few mods to my motor but would like to do a little more and have some questions. This is a non hemi Done so far High flow intake 140 emulsion tube and 36 jet Robertson torque tube 18# valve springs I would like to do a flywheel ARC Billet Flywheel - Predator 1st &...

I was wrong, fine print got me.. No predator, sorry, please delete..

I went to mount my predator 212 engine and the gas cap won't come off because the bar is in the way. OldMiniBikes suggests getting a low profile gas cap, any suggestions out there so my son can finally start riding? Thanks