replacement

I have a Rupp Enduro I picked up, it has the angled engine mount, it does not have the proper clutches. It has a centrifugal clutch up front, that drives a very small v belt similar to an old car alternator belt. The back pulley is just a v belt pulley. I was going to put a centrifugal clutch up...

I'm trying to find replacement spokes for a 10 inch rim. Any one have a lead on where I could find these bad boys. or depending if I do or don't have to cut any of them I may just need replacement nipples. any info appreciated.

Helping a friend out. He needs to know if a comet set up will work in place of the original. If so what size 20 or 30 and any thing needs to be done for it. Thanks

Hey guys, I've read a ton of threads but thought I would just ask outright. Over the summer, my son and I built up a predator motor for his (and mine lol) minibike. We have been running a 14cc head which my son ported and polished, stock sizestainless steel valves, Mod2 cam, Arc Rod, 1.3...

Has anyone used one from this supplier, and if so how was the fit and quality? I'd like to try one, but without the logo on the back. I sent the seller an email and they are not available plain, but I think some Acetone could remove the logo. Thoughts? Rupp Seat Cover Best Quality White Dyed...

Have finally given up trying to get an old 7HP tecumseh motor for a VT-7. What should I be looking at for a replacement? Current set up is for a key start with headlight and tail light. I have attached a photo of the bike before I took it apart. I would be interested in tossing a 7hp...

Hi - Been following/reading along for a bit, but this is my first post. Bought my daughter a Black Warrior that appears to have never been ridden. Takes some work to start, but does eventually and will idle. Dies when you give it gas. I changed oil, cleaned filter, tightened chain, lubricated...

Hi, I have a HM80-155327L with a carburetor stamped 101 which crosses to a 631105. I can't find that number in a replacement carburetor. Will any carburetor replacement for a HM80 work or does it have to be specific to the 631105? Thanks

gonna redo a tecumseh hs40 i pulled of a snow blower. ill be putting it in a bird duck frame. any thoughts on a good replacement / possible upgrade? thanks

So I recently Had the Motovox Minibike Running & The Engine Stopped Running After Some Serious Riding. Friend Gave me a replacement:bowdown:.....((My First Honda)):drool:. Thanks Big Perm!:punk: https://photos.google.com/photo/AF1QipNCjXbxfc8mHmkDpiw0bZFZ7TUjFFTx-W7HHw6s

Hello. Im restoring my brother in laws 1971 sears roper mini bike One of the front springs is damaged and i would like to replace it. Is there a way to disassemble the front fork? Thank you Here are some pics

Hello, I have a 1971 Speedway Shark mini bike with a very tired 3-hp Techumseh engine. I'm thinking of swapping the engine to a new $99.00 China unit from Harbor Freight. I'm concerned because my engine is mounted at an angle, the Techumseh intake manifold is angled so the carb float is level...

Hey, I've been searching and searching for a replacement carb for my HS40 55363D motor and I cannot not find a clear answer on which carb to get. I went to OldMiniBikes warehouse and they said there was an OEM one available but for around $80. Is there a universal knock-off carb I could use? Thanks

It's not a perfect match. The top is a little wider. Every thing else is the same size. $30 shipped paypal only add three percent or send as a gift.

Hi Guys... I have a 1970 Briggs 5 hp serial number 130202 0307-01 7001297. On the original parts list it has the part number for the original coil as 298316. Poking around the site you guys talk about a Magnetron coil part number 397358 being used on these engines and eliminating the need...

Any help with gear/driven replacement for Powell mini bike? Got this on Saturday. Rode it around for about 2 hours over the weekend. Realized the noise I thought was the slop in the belt was actually the chain binding. Took chain off and discovered it has trashed the gear on back of the...

Looking for lenses for both lights. Does anyone sell replacement lenses? Thank you. Tom

I need a replacement carb for my H 30 engine. The one I have is shot, any suggestions on a good replacement and where to get it? Thanks

I see that Tractor Supply now sells a Camo Baja Warrior. Anyone know if the Camo tank and fenders are available? I have only been able to find black, red and yellow replacement tanks and fenders.

Are the original Doodlebug tires available?