spacers

I'm wondering if anyone sells spacers individually or in a set. I have a Predator 212 with 3/4" shaft with a TAV2 30 clone with 5/8" driven shaft. The shaft with the sprocket would need spacers with a 3/8" keyway, and the front would need 3/4" washer(s). I bought a different sprocket and...

Hey, I replaced the wheel bearings up front and I'm 95% sure there were only the two spacers, the axel, and nut. Is there a third or am I crazy? I can post pics if needed. Also, how tight should the nut be when all is said and done? Should the spacers remain in place and only the bearing spin...

Not sure if any of you know about this little gem or not... Whenever I need some spacers made for a project I usually just go here and order them up.... Ordered some spacers for my Trail Horse brake not long ago..They don't have axle spacers, and I always get those from OldMiniBikes anyway...but they...

My apologies if this has been covered before, but my search results are far too broad. Rebuilding a Roadster with my son. Every single part that came off during disassembly is present and accounted for. I have two wheel spacers/tubes, but I think I see a total of 4 in the fuzzy print copy I...

Hey All, We are working on our Bad Dog Gigantic project. The kit shipped with a spacer, which is about a 14" piece of steel pipe to be used to space the wheels to be center. However, we are unsure what size to cut these spacers to. BD just shipped a piece of pipe and we are supposed to...

wanted manco wheel sprocket spacers need a few of em. 6 bolt pattern.

Looking for miscellaneous 5/8" axle spacers. Thanks Bryce

Hey guys, I need a rear axle and spacers for a db30 doodlebug. If you have one sitting around and could part with it just pm me! Thanks guys.

Hey guys, just what the title says, I need a DB30 doodlebug rear wheel with the axle and spacers. I don't need the brake rotor or sprocket. PM me with what you have and thanks guys!

I'm looking for a sensation stroker and spacers and a sensation chopper seat thanks eddie

For Sale I have a rare Little Petro rear wheel assembly with Sprocket,rear Axle and axle spacers and nut,all original and in good condition,ready to restore. $30.00 plus $20.00 shipping Paypal gift option or local pickup welcome

1970 Roadster, Enduro, Scrambler. Front brake assembly. Backing plate, hub, axle and spacers. Free Shipping to lower 48 states. $65.00 Roadster, Enduro, Scrambler. Rear Brake assembly, sprocket, axle and spacers. Free shipping to lower 48 states. $75.00

so I've purchased a fat tire kit the frame and forks are straight, the welds are pretty good I used a lathe to make the axle spacers spot on frame back from the powder coater, it's a bit darker than the sample making a 1-1/4" spacer to fit under the adjustable engine plate

As stated by the guy I got em from they have never been run, he says they swapped 5" Mancos onto the go kart right away and put the 4s on the shelf. Wheels are super nice, bearings marked "Korea" and the Cheng Shin NOS 4" slicks are Taiwan not china so these are old with no weather cracking...

can anyone tell me how long the wheel spacers are on the front and rear of a 1968 Rupp c250:helpsmilie:

Digging through some boxes I found the eccentric rear wheel adjusters and axle spacers from a Huffy that I had awhile back. Dont know if the spacers were specific to the model but I know the eccentrics are not, the bike was one of the full suspension ones $14 shipped. eccentrics are straight...

I have no idea what these rim spacers work on. Diameter is 5 3/4". 1" wide. Bolt holes center to center across the piece is 4 3/8". (3 1/8" in a circle) Possibly Lil" Indian or Ruttman ? I hope someone here has seen these before.

I was going to replace the bearings on my rear hub, and was wondering if I needed spacers between the bearings?

Hi there! I picked up a Baja Warrior on CL a couple weeks back which needed a chain, rear tire. Upon further inspection, the rear wheel spacers were also missing. Does anyone know where I can purchase a set, or have dimensions of the spacers so I can have a set made up? I appreciate the...

The placement of a spacer between the right and left bearings of a wheel hub is an important detail that a lot of people don't pay much attention to; much less take the time and effort to install properly. If you want your wheel bearings to last; a spacer is an absolute necessity. If the...