I'm keeping the stock Lifan 2.8 hp on my dirt bug for my young kids. Through searching the website, I've figured out the bottom two springs(smaller one not in pic), but would like to see what I'm missing in the upper linkage. Was wondering if someone could post a pic of their stock Baja. Thanks.
Looking for a good little spring measuring tool that reads pounds...perfect ones on ebay but they are for car springs..300 lbs plus...I honestly don't know how many lbs are on these little subaru springs are but it can't be near that...so is there a good measuring tool you guy's use..? thanks...
I picked up a early 70"s mut cat trike. The clutch that's on it is messed up. Is there a way to replace the springs on it. I found a30 series clutch for $135. But I'd like to replace the springs and save some money. Any info would really help. Ill upload pic of setup that's on trike. Thanks Ken
I took apart my 5hp brigs flathead and am finally getting around to putting it back together, I noticed there are to different size valve springs, cant remember which ones int and exhaust. Any help would be appreciated.
More garage clearance sale items....
NOS Fork springs.... 1-1/2" O.D. x 5-1/2" long....multiple applications.
$20 shipped for all 4...Paypal only please.
I have a DB30 with a h35 engine and a hillard clutch. I has seen on here that these clutches have a lot of issues before the clutch fully engages. Will a set of lower rpm springs fully engage the clutch faster to eliminate the vibration?
Cleanin' out the garage!
I have no idea what these were on when they were new...but here they are! The lowers look a little tough just because of the "hammertone" paint...they are actually in pretty good shape. The springs look decent, but a little rusty. The distance between the two neck...
Hi guys, I have heard before that when using the Dyno 94ss cam you can just use 2 exhaust valve springs on your 5hp Briggs FH, I was wondering if this is true or not? or even if I can use 2 exhaust valve springs would getting a dual spring set and just using the outer springs be better? :shrug...
hey, i was planning a new clone 6.5 project using the dual 55lbs valve springs plus the 1.3 ratio rocker, i was thinking about using the dyno 308 or 356 cam, i would like to hear from someone who have build a similar combos.
O.K. I took a pic of a pair of fork springs I have for a Heald. They are ugly but wont be seen. I put one in vinegar for a week to get off the heavy rust and compare it to the other not treated yet.. There is still some pitting but I think it wil clean them up good enough considering it is the...
Whats up ya'll. I've modded my Predator to the point of floating valves and its time to upgrade the valvesprings. I've seen spring spacers out there and was wonderin' if anyone has tried them?
Will the stock springs hold up to the extra psi?
The reason i ask is cause I have a friend who is...
Hello, I am new to mini bikes and i just bought a used doodle bug (db30). It runs pretty good but I'm having trouble trying to figure out how the springs are suppose to be setup on the speed regulator/bracket. The way they are now, doesn't move anything but the throttle assembly. I think they...
I just picked up a Tecumseh OHH60 engine, and need the governor springs and the linkage from the governor to the carb. I found the springs on EBay for a few bucks, but still need to find the linkage piece- so I would like to find it all together to save on shipping.
Email to...
I am looking for the springs for the forks. Bought a few sets now & cant seem to get it right. Where are you guys getting your springs from? Does anyone have any they would get rid of or can direct to a place to buy them?
Wire size: 3/16" best i can tell
length: 3-1/2"
ID: 1-1/4" ...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.