bolt

I was looking at the sprockets at OldMiniBikes for the cat but it doesn't say dimensions. Anyone know if this will work on my cat 250? #35 Chain - 68 Tooth Sprocket for Cat Mini Bikes with Disc Brakes I'm almost sure the spacing on bolt pattern is 1 and 7/8" Any help would be greatly...

ten dollars each to your door on some misc. parts i have laying around :thumbsup: db30 front wheel 2"x4" air filter universal foot pegs fender 1" bolt on kick stand misc brake shoes and springs

I have a predator 212cc with a OldMiniBikes stage 1 kit w/aluminium flywheel. I put the bigger e-tube and #37 jet in the carb. I also have a seized up honda gx390 pressurewasher with a good carb on it. Which is better? Is it a direct bolt on ?

Hey everyone. Here's a pic of my latest project. This started as a standard AZUSA frame, fork and 6 inch wheel kit. I made a custom bolt on front springer, rear swing arm, spring seat mount, chain tensioner, chain gaurd and foot peg mount. Every thing is bolt on. Suspension works great and it...

FYI for new Predator 212 owners.... After getting the blue mini running I had a oil leak next to the rear fill plug. I could see it leaking between the cover plate and case. Tried to tighten the bolt but it didn't help. What I found was the factory bolts were to long and bottoming out. Put two...

What brake drum (for band brake) do I need to bolt up to a 6" Manco aluminum wheel? The bolt pattern on the one that came with the bike doesn't even come close. Thanks for your help. Jerry...

Noob question but does a aftermarket cam add compression ? Approx how much ? what kind of rpm does a cam add ? I'm debating on a cam 2000- 5500 or a cam for 7500 rpm .. 7500 needs 10:1 or more .. so questions are how to add rpm along with compression to satisfy the build ...

So the Delta 1 chopper I picked up the other day has some serious slop in the headset/fork/steering tube. a 1/2" bolt fits snug in the fork plates, but has play in the tube. It almost seems like it should have a bushing or sleeve between the bolt and the tube, but there isn't one. Did these...

brand new hemi head with pushrods ready to bolt on - $50, $100 if you want it ported 5 bolt valve cover clone head, ported and milled - $50 king billet steel flywheel - $45 2 seks clone ceramic coated headers - $35 each super stock rlv clone header - $10 isky black mamba jr cam - $30 custom...

I've tried tapered head sex bolt, barrel bolt, binding post, etc., but nothing is coming up. The barrel is 8mm wide and just shy of 1-7/8" (47mm) long.

Hey...I am looking for the ever elusive 67-69 Rupp tank (painted/no chrome). This is for a friend of mine. The last one I had was sold and shipped with fenders for 100 bucks to a member. I don't expect that sweet of a deal....but he is working with a budget...so cheaper is always better. Trying...

After one has snugged the head bolts with fingers, what is the proper torquing sequence? Please refer to the figure below:

Does anyone know if the item for sale here on Ebay will bolt onto a 1960's Lil Indian 6000 Grand Series? Brake Caliper Cable Go Kart GoCart Mini Bike Minibike | eBay

On some the later 3.5hp style engines they have a flange convertor that screws into the 1/2 pipe thead on the exhaust and sticks out just a touch with a standard 2 bolt flange for bolting on the bigger muffs that cant unscrew with the tank on. Anyone have a part number for that or a stock...

Here is a set of Western Flyer SS300 Forks for sale. They are slightly tweaked but look like they could be easily straightened. They also have the long mounting bolt and nut. Asking only $10 plus shipping?

I have a great running tec 3.5 hp with at 5/8" crankshaft. I want to tap it to fit a 1/4" bolt to hold on my clutch. I bought a tap and die set from Lowe's. My question is to tap to fit a 1/4" bolt, do I use a 1/4" drill bit followed by a 1/4" tap? I know it sounds so basic, but I only want...

Top 2 seats $20 ea Bottom 2 $25 ea Sebac shocks- $30 pair not stuck but could use new paint. 6" manco whee with Carlisle universal tread tire. Bolt stuck in one of the holes and rim of one bolt hole damaged check photos. Threaded holes on both sides for sprocket...

jit's got a pipe on it but ide like something that goes under my seat any shops make a bolt on one?

Rare OG Bonanza lightening bolt badge # 5966. Good to fair shape for it's age. HARD TO FIND !!!! Price is $80.00 + $5.00 shipping PAYPAL ONLY !!!

Do they sell bolt sets? Head bolts,side cover, intake exhaust esc. 3hp and 4hp