cable

I should of put it here to begin with :doah:. I need the brake cable hardware for a Lil Indian that connects the cable to the frame. Im not sure whats its called but it allows you to adjust the cable with it like this one... thanks in advance Mark

Im trying to locate the same brake cable hardware as this on the lil indian that connects the cable to the frame so you can adjust the cable . Some sort of ball adapter of some kind. Thank Mark

Hello, first post here. I'm restoring a 1966 Taco Burrito. I need help with what I need to hook up the throttle cable to the carb linkage. The cable housing is clamped to the carb, but how do I hook up the actual cable? Thanks!

I have what I believe is a CSS Chopper. I do not have all the parts. What I need is a picture or two of the brake set up. How the cable mounts, type of bolt, etc... Any Help.

My rear brake cable broke tonight so I need one. PM or post. Thanks

Im in need of a brake cable with the conduit at least 65" long and the cable about 70". Longer is fine as long as I can cut it down. Does anyone know of a place to buy these longer cables?

I just cleaned out my carburetor and I'm assembling everything back together, but got stuck on a part. As I was putting back my throttle setup back together, I noticed the wires are frayed and are not fitting through the nut with the two holes. Is there a way to make it smoother, so the little...

If you're lucky enough to have an original Powell throttle or might own one someday you may want this. It is the end that get swaged onto the cable for the little rack & pinion mechanism. If the old one is missing, teeth are stripped, or the cable breaks....you will be out of luck without one of...

Looking to see if I can get the carb hooked up & working on a 6.5hp generator motor. It seems like it idles really high with this carb & I don't really know if it will work for a mini bike. Also trying to figure out how to hook a cable to the carb.

Hello all. I have a brake cable that has a plastic coated metal cover over the cable. I need to shorten the covering by about an inch. Its a Rupp cable, and already has the ends assembled so I can't just pull the cable out. Any suggestions ? Thank you. :hammer::shrug:

Well my grand daughter broke the Tri Rod throttle cable and it is 110" long throttle cable. The barrel end had a kink when I got it I knew it would not last . But we did not have a better one so we just went with it. Anyone know where to find one or a little longer? It has to be 110" long or a...

I searched, but did not find what I'm looking for. My brake cable is barely long enough to reach the connector. I have the cable thru and screwed down, but is is not even a 1/4" out of the other side. So, here's what I need to know. 1. Do I need to shorten the conduit? Just cut off an...

Why would an engine manufacturer ship an engine without the throttle housing clamp? Does anyone know where I can get one that will replace the one that should have shipped with this motor? The first photo's mounting hole is a through hole (no threads) and I can deal with that. The second...

Can anyone tell me where to get a new 72nch brake cable from?

I am having issues coming up with the best way to hook up the throttle cable to the stock 5hp Briggs and Stratton. Most of the stock throttle was missing from this motor, so I was hoping to hook directly to the carb to get it running better. How are you guys hooking up your throttles? Pictures...

brake and throttle cable I want to run the brake and throttle cable through the frame of my Allied mini pit as my wife calls it. Too clean it up, how big are the ends on standard brake and throttle cables

I have this drum brake with no cable attached. I wish to locate the proper Brake Cable. I know very little about a clevis cable. Recommendations please!!! will this work? Mini Bike & Go Kart Parts, Lawn Mower, Chain Saw and Outdoor Power Equipment | OldMiniBikes Warehouse does this take a drum brake...

I just got my carb for my 212 predator and I hook the throttle cable up and and it only has a very short travel on the throttle now I'm using the stock doodlebug throttle assembly and cable, I think that the end of the cable that goes into the carb might be too long because I'm about 99% sure I...

Looking for a throttle cable for a Arctic Cat Whisker with a saxonette engine.

Forgot to put this up. Picked it up couple weeks ago. From beekeeper on here. 25$ just get it out pf my yard he says....:laugh:. Got a blown motor. Busted rod we think. Has some busted welds here and there. No biggy. Picked up a throttle cable today. $26.95. Lol. Not sure what engines goin on...