lighted

For sale is a lighted could from a 72 HS40. It should fit HS50 as well. I have not tested this unit. It came in a bulk buy. $48 shipped to the lower 48.

Is there lighting magnatrons for briggs 5hps? Would i need a new flywheel?

This was a running engine took off of a 1970 fox street scamp has the orig pull starter I will not be including the muffler or chaingaurd as I have the bike forsale Also they go with it im asking 100 $ but will entertain all offers pics are in my gallery Pm for any more questions or details

Picked up this Tecumseh Lighted Sign off CL yesterday

Selling some projects.Declining health is forcing sale of some of my projects.So here ya go. Its a trailbuck,original 7 horse tech with lighting coil.I do have a recoil,but its not the original.Engine has good spark,never heard it run.Frame is good and straight,has a wallowed hole where the...

I got one of those cheep 12v horns to use on my rupp, but in low rpm / idle it's not putting out much, would a 6v work better at idle that's where I would use it mainly. I still have to try to adjust with the screw but just wondering.

Looking for a good lighted Tecumseh H25 flywheel for a 1960's vintage H25. If an H30 or H35 will work on an H25 I would be interested in those too.

Thats right, it has a lighted coil!!!:thumbsup: its needs some work though. its an E65 5/8 shaft crank, ALUMINUM rod (uncommon from what I have read) Unmarked 8 petal intake I know sometimes the centaurs had Go power parts installed as well, I dunno what this one is. So for the bads, one...

runs 45.00 pick up only

Yep you read it right ! I have a lighted hs40 off of a Speedway . Even has the diaphram carb . Motor has spark and compression. Pics will be posted later, or PM with an email or phone numberr and I will send them to you asap. $200 plus shipping Or possible trade for a real nice H60 ..:shrug:

I bought these with plans on building a lighted 5hp but have since changed my mind... downsizing all kinds of stuff.. $75 shipped

I was redoing this motor off my Rupp But the bike got the axe. It is a 1971 HS40 lighted coil motor. I did not run this motor, but it had good compression and spark. I pulled it apart to just simply go over, paint, and detail. All the parts are there (just realized the starter cup and screen...

First off, its better than it looks:wink: HS 40 3" longcrank, Lighted coil motor. came off a Fox trail tramp. Before I disassembled the bike I cleaned and set the points and ran the motor and checked the lighting coil. It fired easily and ran good via force feeding starting fluid and the...

Vintage Trail Flite Mini Bike

True Rupp tecumseh HS40, meaning it's got the longer bearing supported crankshaft:thumbsup: Keyed and tapped. 1970 did not use a slanted intake rather a diaphragm carb, this is the original setup. and IT IS a lighted motor! Been sitting on a shelf for a couple of years in my shop. It has...

Embarrassed to ask but, I have a h50 with lighted coil. There is the standard 3 prong plug out the front. I have a kill switch from OldMiniBikes Warehouse with the plug on the end. Where do I plug it in so I don't mees it up? You would think all the reading I do on here I would know but....

I found a 7 horse Briggs lighted electric start flathead nearby. Will that work on a minibike? It's on a snowblower and the add says it has a clutch that is the same as a minibike but it's teeth are shot and needs replacement. Engine runs and starts great. I did a search on 7 horse Briggs and...

Hey..its rare I ever make one of these "wanted" threads...but here goes. I am looking for a rear tail light and bracket for a Harrison. It can be in rough or good condition. Or if someone has a complete light set-up (lighted motor not needed) they wont be using.... Please feel free to PM me if...

First you're gonna need a Tec big block.. In this case we have a VERY LOW hours HM50 big block.. HM being the iron bore aluminum block, it will look all the same, but have a hidden iron cylinder.. When I received the motor it had been a salvaged power sprayer. Kevinheimer got it from his dad...

First you're gonna need a Tec big block.. In this case we have a VERY LOW hours HM50 big block.. HM being the iron bore aluminum block, it will look all the same, but have a hidden iron cylinder.. When I received the motor it had been a salvaged power sprayer. Kevinheimer got it from his dad...