piston

  1. Ruppster81

    WTB: NOS Tecumseh #34332 HM80 Piston Ring Set STD

    Im looking for a new OEM set of STD piston rings for a Tecumseh HM80 part# 34332. Please PM if there are any leads
  2. C

    ARC rod and Piston

    I'm thinking of putting an ARC rod in my clone- do you have to remove the piston to do so? I really don't know how to put those rings in.
  3. W

    flat top piston

    can a flat top piston be put in upside down , if so will it cause any harm ?
  4. derekbmn

    Piston Clearance

    So I'm having a Briggs 3.5hp bored .020, and looking to see what the recommended piston clearance is. I'm thinking it should be in the .004 -.006 range, but wanted to pick your brains first.
  5. M

    Flat top piston, how much of a difference?

    Long story short, my friend and I both have the same type of minibike, baja warriors with gx200 clones. We both have billet rods, AGK single stage headers, 6* spark advance and 18# springs. I've got a .265 lift modified cam in mine and my friend has a flat top piston on his. I have the TAV30...
  6. M

    Installing billet rod and piston

    I will be installing my ARC rod and Honda flat top piston soon and was wondering if it would be a good idea to apply bearing lube (instead of oil) to the crankshaft and bearing inserts?
  7. M

    Honda flat top piston question

    Will someone please take a look at the pic of my new Honda flat top piston and tell me if it is supposed to be installed in the block with the dot on top facing in the direction of the push rods?
  8. H

    Piston Slap?

    Greetings. Just joined; intro is in the proper section. After adjusting the chain, loosening the throttle stop screw, loosening the brake adjustment and lubing everything, this mini-bike is pulling my 9 year old around just fine, even hills. Although, that wasn't the case right out of the...
  9. S

    590 comp height piston wanted

    i need a new or like new piston for 4.475 rod and an aluminum std bore (chrome) brggs 5hp. wiesco, horstman etc
  10. S

    can i use this piston

    This came out of a siezed (siezed from being out in the rain not racing)engine that i freed up with patience and P.B. Blaster it is a wiseco 186 chrome piston. Can I use it or is it garbage take a look at the scoring. Sorry about the picture quality but metal is hard to photograph
  11. R

    piston stuff

    i got a 6.5 harbor freight motor. i gotta keep it stock. what do i need for a rebuild?
  12. cncd11

    cryo treated flattop piston

    whats the difference? i bought the cryo treated from NR and it looks like a normal piston to me
  13. 125ccCrazy

    Brand New Briggs World Formula Piston, Intek, Animal

    I have a brand new stand bore Briggs WF piston and rings I just bought but after looking at my cylinder real close I noticed some scratches I dont like so I'm gonna have the block bored .020 over to clean it up... I just pulled the piston out of the box and put it on the rod but thats as far as...
  14. Jay Wrix

    Chromed Raptor .10 over Piston

    Does anyone have a chromed .10 over raptor piston, or the equivalent Wiesco model? Im currently stuck on one of my projects =/
  15. Jay Wrix

    .10 over Chromed Raptor, or Wiesco Piston

    Does anyone have a chromed .10 over raptor piston, or the equivalent Wiesco model? Im currently stuck on one of my projects =/
  16. 125ccCrazy

    6.5 flat top piston with Milled head too Much??

    I have a 6.5 that I am going to build, I dropped the head off to get milled .065... My questions are, Will a flat top piston with the head milled be too much compression?? next question: which engine has teh flat top piston stock?? gxv160 mower engine or the gx160 horiz shaft eng?? I'll be...
  17. B

    Piston rings

    I need a new set of rings for my HS50. I accidently snapped one of them when i removed them. I found these that work for almost every engine exept mine. But it says works for 4-6 hp engines so is it a good bet that they will work on mine. 23-1460 - Tec 34854 Piston Ring Set (Std.)
Top