stage

Hi guys thanks for all ur help. I bought the stock 1 kit. Next I am Ok I got to ride a friends mini with the stage one kit with a torque converter. I like it. 1. Stage 1 kit I got. 2. I bought some sprockets but they are not going to work 3. Going to order converter and new...

Hey all, recently purchased a stage 1 performance kit and had a couple questions, ive installed a few of the items in the kit already but was wondering what the rod with the thread at both ends (pictured) was for? I couldn't seem to find it in the description. The other thing is the header pipe...

From OldMiniBikes warehouse Basically includes angled air filter Bored out stock carb (jet size and emulsion tube not mentioned) 1" header w/screw on muff Valve springs (doesn't state spring tension, guessing 18lb) Choke hold bracket if this is a worthy kit, I'd like it to work well with a tav clutch...

I have a tecumseh star with an ec birt stage 1 tillotson for sale. I had this on a go cart that i ran around the neighborhood for a while, but it was just too loud. I dont know a lot about the motor, i bought it on ebay, but it ran great. I know it has a billet rod, so i believe it was race...

Well I finally got the bike done(so far) with the 6.5 hemi predator, HRMB engine plate/hardware/clutch/chain kit, and OldMiniBikes Stage 1 Kit. Gets up goes quickly, can launch on my Kawasaki KD100M and get a healthy head start before it gets passed on the top end. This thing is a blast. Throttle...

Welp, I got my max torque 12t clutch installed and predator 212cc motor insyalled after a few minor hiccups and wow, the power difference from stock. Soooo..of course, MORE MORE MORE!!! What would be best stage one kit for predator for the mmb80 that would fit right (with out mods for once) I...

I'm still researching upgrades for my baja warrior to keep me busy over the cold winter months. I was lucky enough to pick up a 212cc (Rato/Predator) engine on clearance at my local Canadian Tire, and now I want to spend the winter upgrading it. I was leaning towards the stage 1 kit from OldMiniBikes...

I have a 2006 Baja w/ a 212 Predator. Can I use a Stage 1 upgrade and still maintain use of the governor?

https://www.youtube.com/watch?v=r4flZad3vYM

Will someone please explain to me what the stages do on a header

This is a Baja Heat with a mechanically stock 212 hemi & TAV-2. I swapped in a 35 jet & an Etube from OMBW, an ARC/RLV exhaust & filter/adapter w/ clutch lever bracket. It won't idle with the choke fully open & part throttle is kind of sputtering. I'm sure I have an idle circuit issue...

do i have to use 8 advace key or can ii just use stock one

Grayson County Texas here. I have been searching for a while for any mini bike to fix up. Stopped in an old mower repair station in Paris Texas one afternoon. Asked if by chance he had any older minis around. He answered NO but I have an old Manco for $50.00. Bought this Big Cat and a go...

Just got back from vacation with a present from ombw waiting for me. I bought the non hemi stage 1 kit. I'm not the most mechanically inclined guy and was hoping the "kit" came with some instructions or step by step guide. Boy, was I naive. Can anyone lead me to a video or online...

I am about to start this new build and I have a mikuni 24mm for it but I don't have an intake for it. If you have one that is pretty cheap, reply or inbox me and let me know prices. I also need a 3 stage header as well as a std length billet rod. If you have a used billet flywheel for a flathead...

I just bought a predator 212cc engine for $100 and put a OldMiniBikes stage 1 kit and billit flywheel on it. THEN I read about the BSP 196cc engine also from OldMiniBikes. Sounds like a much better engine for around the same money. Anybody know any HP stats on these rwo motors with the stage 1 kit added

I want to go with a remote tank on the bike I'm putting my briggs raptor engine on and wanted to know what my options are as far as carbs. I don't want to go crazy price wise and want to keep it as stock as possible. Don't even know if there's any aftermarket parts under the hood. The guy I got...

Anyone want to sell me a decent running 1970-75 h35? Doing a modern/vintage restore on an arco ez rider for the wife for a parade bike. In the "gathering parts" stage. Got everything but a nice engine. I dont wanna strap a clone on it. She isnt ready for it :laugh:.

Can anybody tell me about these engines ?right now I'm working on a HF Predator 212cc . Installing Billet flywheel ,Rod, Springs , mikuni carburetor performance air filterwith a stinger muffler (stage one kit).i'm just wondering if I could've bypassed all the work and purchased one of these...

Tote Gote 750 project has been on hold, hoping to find better parts. I finally have it to the roller stage. This will be a tribute to the racing Tote gotes used by the 'Timp Trail Riders'.