putting

  1. 125ccCrazy

    Looking for information on putting a 69mm crank in a 420/440

    I called one of the distributors that sell the cranks, rods ect and asked them what would I need to do and what combination of rod and piston I would need to put the 69mm crank in a 440 block and the answer was "I dunno",,,Really??? you sell all these parts and race engines and dont know what...
  2. Fantic Freddy

    Putting the Broncco TX-7 back together

    Everything is painted and chromed..I have the engine mounted, and the rear suspension put on. Started early on my winter project.
  3. B

    Is it worth putting up for sale

    Just curious if its worth putting up for sale in the parts section. My boy has 2 Baja heat engines both are seized up. Just wondering if stuff like the carbs and light coils and the flywheels have and value before they get hauled out for scrap pile thank you
  4. M

    putting feelers out

    So cal anyone interested in possibley a get together and ride at willow springsinternational raceway they have a pretty cool kart track and u can ride all over the place there theres evendirt areas to ride for u trail guys but its pretty hilly so tav might be necessarya again just putting...
  5. Sixpac440

    Monster Moto E250 for the Granddaughter ......

    My almost 6 (6-7-15) year old Granddaughter Rylee has been ridden around on minis for the last 2 years and has been chomping at the bit for her own. I'm to skittish about putting her on the real McCoy but I think she is ready for something so we just got this for her ... Kmart.com Here is a...
  6. steven Durham

    Tri-Sport cooking the trail

    Well yesterday I went to see my Mother the family was digging up a 500 gallon oil tank that had been in the ground for over 50 years and all went well. My mother gave me another picture from my past. Nothing gives you a thrill like screwing up the wick and putting the trike through it's paces...
  7. CarPlayLB

    Can you imagine putting this on your mini?

    Make you look like a schoolgirl! Vintage 1982 Wisconsin Post Cereal Mini Bike Bicycle Vanity License Plate Cheez | eBay
  8. D

    2015 OldMiniBikes Build Off Fox Fun Jff

    I bought this earlier this month. I bought it just for the build off. I'm not sure what direction I'm going. It came with the tank, exhaust, and two tec motors. I may end up putting a predator on this if I end up putting a new front end and swing arm on it. I want to put some bigger tires...
  9. NTRO

    E 3 Spark plugs

    I have a stock DB and it was stalling out at about 1/4 to half throttle. so went and got a E3 plug, at lowes. WOW big difference. the engine has a whole different tone to it...just putting this out there to anyone who hasnt tried one .best 6 dollar investment on this thing yet.:scooter:
  10. dakota

    Bought a Motovox from Sears

    couldn't pass it up for $279.99 - 25 in point I had and a $5 gift card they gave me - total $249.99 no tax (bought on-line pick-up at store)- tottaly stoked - not even putting gas & oil in it - taking motor out asap for the 212 predetor - selling the 2.5hp asap.
  11. A

    Putting a plate on a 74 CT70k3?

    So heres the deal, my old man bought me a 74 Honda trail 70 when i asked for a dirtbike at 8 years old. And boy did i ride the hell out of it lol. Up until the day it locked up, at which point it got put in the barn and was never ridden again until about 4 months ago. I finally got my own house...
  12. G

    Putting new pictures on and it is full???

    I was just going to post some pictures of some NOS Rupp parts to be identified and it said my alloted memory that was left was too small. This happened before so I went in and deleted some good pictures from the Detroit Autorama from last year. Is there any way it could be expanded or do I have...
  13. H

    just picked up a hawg ty, need help putting it together

    hey i got a hawg ty 5.5 hp. it is missing all the springs that hook up to the throttle, ( i have the springs, but i dont know how they hook up). also, the previous owner drove it into a curb and the front forks are slightly bend back. any where i can get replacements? its leaking oil on the...
  14. W

    putting a clutch on a tecuseh motor

    I have a 3.5 hp tecumseh motor I was planning on putting in my Rutman frame. It had a pully on it when I bought it which was held on by a bolt in the center of the pully and a set screw. It is a 3/4 inch shaft with no key way in it Is it possiable to put a clutch on this type of crank shaft I...
  15. jon321

    How much MPG is sacrifced with people putting in those Lifan motors?

    I just have the stock 72cc , some extra HP would be nice but how does the bigger CC's do on your fuel economy? What would be a nice motor upgrade for power but not too harsh on the fuel economy?
  16. P

    two engines which is putting out more

    affordablegokarts: Stage 3 Engine or affordablegokarts: Big Block Engine Stage I
  17. N

    Need help putting a motor on an MTD frame

    I picked up a frame with no motor. going by some pics on the internet I need a pulley, clutch and a chain. What should I be looking for and where can I get it?
  18. MotorOil

    What I'll be putting together.

    Here's the mini bike frame I bought last night and the motor I've been keeping to put in one. I'm trying to identify it here in the proper section so if you want to weigh in or you have one exactly like it, PLEASE post in that post...
  19. ozark caveman

    Putting tire back on rim

    Need help? Any tutorials out there?
  20. W

    just putting it backt together.. Georgia

    hellow everyone.. Im glad to find some like minded folks. Im from georgia and i have just started the process of putting my old minibike back together.. I will post pix as soon as i fig out how to. So far I have the frame,rear wheel, I have a 6hp powersport tec motor and Max torque CVT off of an...
Top