mounted

  1. DaveL12

    Got the tank mounted on my rupp cub

    I mounted my tank it took a little bit of customizing of the brackets/clamps whatever they're called in this case lol I thought I figured out a pretty clean way that works for my bike and figured I'd share some pics Seems to be the best way I could have done it considering the amount of space I...
  2. Sixpac440

    Hitch mounted carrier limits?

    I have a 02 Deville. The only hitch I can find is a Class II with a 300 lb tongue rating. The rating is measured from where the hitch ball would be. The receiver is 1-1/4" A 60" x 20" carrier rated at 500 lbs would be a good size. It has a 2" tube to go in the reciever and in this case...
  3. H

    Can a Centrifugal clutch be mounted either way?

    I have a 70's go cart that looks like a Dune Cat. The problem I have is looking at the lower sprocket and where the motor mounts, putting on the centrifugal clutch with sprocket out will not line up with lower sprocket. If I put centrifugal clutch sprocket inward it will work. I bought this go...
  4. pomfish

    Crazy mounted TAV

    Enjoy this one; 16hp mini bike
  5. S

    wtb frame mounted tank

    Im looking for a tank to mount on the frame of my baja mb 165 where the fake gas tank goes. I basically want a normal style motorcycle tank to put on my frame and place the Honda tank thanks
  6. jsquared89

    Engine mounted at angle?

    I was wondering what the purpose is of mounting engines at an angle like on some minis, like on some rupps, Scat cats or bird nighthawks. Just for looks? Also does it effect the oiling?
  7. H

    briggs...carb mounted to gas tank. wierd?

    i just got three parts engines from a guy at work. one is complete and fires on spray. it is a 5hp briggs with a 3/4 shaft. what is differant to me is the carb setup. the carb is mounted to the tank with a tube feeding directly to the carb into the tank. straight pipe straight down from the carb...
  8. mmisterbungl

    Tecumseh mounted, but chain acting screwy.

    So I put a new (old) Tecumseh on my Trail Horse today. I'm a little confused as to what's going on. When I mount the engine and tighten down the bolts to the desired chain tension, everything looks fine. Until I start rolling the bike. FYI - this is a direct drive set up...no j/s. The chain...
  9. G

    Side Mounted Crankcase Breather Disassembly?

    Do the Tecumseh side mounted breathers come apart in some way? I have a new gasket, and while it appears it will slide over the reed casing, I don't want to tear it if there is a way to pull these components apart. Also, if anyone knows the best way to replace the filter and what to...
  10. jeep4me

    Tecumseh Recoil Mounted Lighting Generator

    I have a Tecumseh recoil and small recoil mounted lighting generator for sale. These are not made any more and are a nice alternate method of producing 12v DC to run a headlight. The geneator itself will mount to any Tecumseh recoil that has a hole thru the center of it and has the 3 screw...
  11. J

    Need pictures of AGK front exit pipe mounted

    Does anyone have any picture of the AGK front exit pipe mounted on their bike or motor? Thanks, Jared
  12. minidragbike

    HD Shaft Mounted Rockers

    I have a new Pair of Shaft Mounted Clone Rockers. These are made or steel and are very heavy duty. I want $40 shipped for them. Anyone thinking of going modified will need a upgrade.
  13. Strigoi

    got the front end mounted

    since this is an Azusa/DB hybrid it's best posted here. i took 4¼" off the front end and will be putting on some pitbike risers/bars soon. the DB wheel is not permanent (since it looks like shit) and it will be getting a pocket bike wheel on the front. i'm still mocking shit up and figuring...
  14. P

    Tecumseh side mounted gas tank

    Does anyone have a picture of a Tecumseh side mounted gas tank (Mounts on PTO side, it is round in shape). Also if anyone has one for sale please contact me. It is for a late 60' Rupp Go-Kart. Thank you. Paul
  15. K

    Clutch mounted on Jackshaft

    Hello everyone I am new to the mini bike scene and setting up my first bike. Was wondering how many of you have your clutch mounted on the jackshaft and if you like it and what advantages you have found from doing this? I have a 6.5 yellow clone from NR racing govenor removed 6 deg crank key...
  16. machinebike

    Briggs horizontal mounted on angle...

    I made a scooter from a mountain bike, mounted a 43cc, but not enough power, I have a 5 hp briggs, and was wondering if it would work mounted on an angle on top of the mountain bikes swing arm in front of the rear wheel? Also, do yopu think its too much power for the mountain bike set up I am...
  17. machinebike

    VERTICAL MOUNTED engine on Mini Bike...?

    will it work? Here is some pics,..
  18. S

    frame mounted gas tank

    I am thinking about putting a frame mounted gas tank on my doodlebug. Does anybody have any good ideas on which gas tanks work best for the doodlebug, and any pics, and where to get them at?
  19. S

    frame mounted gas tank

    if you have a 6.5 clone with just a 22mm mukini carb air filter and a header,and thinking about putting a frame mounted gas tank if front of the seat do you need a fuel pump?
  20. 5

    Anyone have a Mini with the Clutch mounted outboard?

    I have a motor and it looks like I can only have the clutch mounted outboard. That means the shoes are on the inside (closest to the engine) and the gear is on the outside. Anyone have some pictures? Thanks.
Top